STMix 1U - Pulp Logic Frontpanel

STMix 1U - Pulp Logic Frontpanel

These are alternative STMix panels with a Pulp Logic format.

STMix is a four-channel stereo mixer in Pulp Logic 1U format. It can work independently or as an expansion of our Hexmix module via the six-pin connector located in the back. The module is designed under the Pulp Logic 1U format.

€10.00

Product Details

Reference DIY1UPL022

16 other products in the same category:

Noise Plethora PCB/Panel Set

PCB & Panels

Noise Plethora PCB/Panel Set

€55.00

PCB/Panel version of Noise Plethora Module. This PCB/Panel set includes the audio codec and the pogo pins. Noise Plethora is a multitimbral noise monster in 14HP.The module consists of three digital sound generators, followed by three analog multimode Filters. This combination makes it easy to sculpt different textures and noises and play with them...

VC Slew Limiter PCB & Panel...

PCB & Panels

VC Slew Limiter PCB & Panel Set

€23.10

PCB set and aluminum front panel for our VC Slew Limiter module. See module details, documentation, and B.O.M. files here. A voltage-controlled slew limiter, AKA Lag Processor. A slew limiter is a device that smoothes an incoming signal, limiting the maximum rate of the output voltage over time. It is widely used with pitch CVs to obtain portamento and...

VCMC PCB & Panel Set

PCB & Panels

VCMC PCB & Panel Set

€45.00

PCB set and aluminum front panel for our VCMC module. See module details, documentation, and B.O.M. files in here. VCMC is a voltage-controlled MIDI controller. A fully editable MIDI controller with eight faders and push-buttons. Each of them with a CV or Gate input associated to automate their functioning via external signals or to be configured...

Crush Delay v3 PCB & Panel Set

PCB & Panels

Crush Delay v3 PCB & Panel Set

€40.00

PCB & Panel Set of our Crush Delay v3 module. SMD parts are already presoldered. Further documentation and B.O.M here. Crush Delay v3 is a special Echo-Delay unit based on the PT2399 IC, which is able to offer 400ms of clean delay and up to 2 seconds of dirty repetitions, having a special talent to generate noisy-glitch textures. This third version...

Dual Attenuverter PCB &...

PCB & Panels

Dual Attenuverter PCB & Panel Set

€23.10

PCB set and aluminium front panel for our Dual Attenuverter module. See module details, documentation and B.O.M. files here. The Dual Atenuverter is a CV/Audio utility module designed to atenuate, invert and apply offset to an input signal. The “ATENUVERTER” pot will multiply your signal by 1 when turned clockwise and -1 when turned anti-clockwise. The...

CV Thing PCB/Panel Set

PCB & Panels

CV Thing PCB/Panel Set

€34.00

CV Thing is a fully mappable CV to MIDI converter in just 6HP. It's based on our VCMC module, but aiming for small and compact performance rigs. It has eight inputs that can be mapped to any MIDI message quite easily thanks to its simple and intuitive user interface. Ccs, Program change,v/oct to Note, or Clock are some of the messages that can be...

Morphader PCB/Panel Set

PCB & Panels

Morphader PCB/Panel Set

€42.00

PCB/Panel set of our Morphader module. This is an SMD PCB Set. Please be aware that this is a very dense module and challenging project! BOM Files and further documentation. Morphader is a performative tool designed to make multichannel CV/Audio crossfade easy and comfortable. Fading from one quad CV/audio scene to another. The core of the module has...

STAmp 1U - Pulp Logic Frontpanel

PCB & Panels

STAmp 1U - Pulp Logic Frontpanel

€10.00

These are alternative STAmp panels with a Pulp Logic format. STAmp is a stereo amplifier designed to boost your external signals into modular levels. The module is designed under the Pulp Logic format and uses the same pinout, making it fully compatible with the Pulp Logic’s cases rear connectors.

VC ADSR PCB & Panel Set

PCB & Panels

VC ADSR PCB & Panel Set

€31.12

PCB set and aluminium front panel for our VC ADSR module. See module details, documentation and B.O.M. files here. The VC ADSR is our take on the classic ADSR: now smaller, more powerful, and user friendly. FEATURES Voltage-controlled stages with manual control. Gate output on each stage of the envelope. Push-button and Gate/Trigger input Control of the...

Joystick PCB & Panel Set

PCB & Panels

Joystick PCB & Panel Set

€26.40

PCB set and aluminum front panel for our Joystick module. See module details, documentation, and B.O.M. files here. A compact attenuverting (attenuator-inverter) joystick controller and Gate Generator. With it, you can generate and/or process two control voltages using only one hand. Provided controls for CV ranges and offset adjust the boundaries of...

Burst PCB & Panel Set

PCB & Panels

Burst PCB & Panel Set

€35.00

PCB set and aluminum front panel for our Burst module. See module details, documentation, and B.O.M. files here. Burst is a Pingable Trigger Burst generator with distribution, probability, and time division control. It will create multiplications of your triggers, leading to doubles, triplets, quintuplets, and true polyrhythms for your modular system....

Out 1U - Pulp Logic Frontpanel

PCB & Panels

Out 1U - Pulp Logic Frontpanel

€10.00

These are alternative OUT panels with a Pulp Logic format. Out is a stereo output module designed to convert audio signals from your modular to line-levels. The module is designed to be used on Pulp Logic cases, as it uses the same pinout. The module also includes a high-quality Headphone amplifier with an auxiliar monitoring CUE input.

Hex Mix VCA PCB & Panel Set

PCB & Panels

Kickall PCB & Panel Set

€30.00

PCB set and aluminium front panel for our Kickall module. See module details, documentation and B.O.M. files in here. Kickall is a 6HP compact synth voice that features everything needed to make a big fat Kick sound: A stable VCO that tracks V/Oct, a couple of VCAs, envelopes for volume and pitch, and an aggressive waveshaper. The module has been...

Muxlicer PCB & Panel Set

PCB & Panels

Muxlicer PCB & Panel Set

€32.00

PCB set and aluminium front panel for our Muxlicer module. See module details, documentation and B.O.M. files here. Muxlicer is a sequential signal processor designed to add a huge range of special functions to your modular setup in the minimum space. Is divided into three main blocks: a Digital Step Controller, a Gate Generator, and an Analog Switch...

STMix PCB & Panel Set

PCB & Panels

STMix PCB & Panel Set

€27.00

PCB set and aluminum front panel for our STMix module. See module details, documentation, and B.O.M. files here. STMix is a compact 4 channel stereo mixer with an auxiliary input. This input will allow us to chain a few of them or to insert an extra fifth input. This module is compatible with our Hexmix System and can be internally connected to the...

Percall PCB & Panel Set

PCB & Panels

Percall PCB & Panel Set

€45.00

PCB set and aluminium front panel for our Percall module. See module details, documentation and B.O.M. files in here. Percall is a percussive oriented module that will shape four different sound sources into percussive sounds. Percall has four VCAs with dedicated decay envelopes and a mixer, so you can prepare a percussion submix. Added strength input...