Mixer DIY Kit

DIY kit version of our Mixer Eurorack module.

The kit includes all the necessary parts to make a completed module including power cable and four of our bespoke Knurlies M3 rack screws.

A four-channel mixer, suitable for audio or control signals. It features regular and inverted outputs as well as an LED level meter.

Current needs: +12V: 21mA, -12V: 10mA
Width: 5 HP
Depth: 20mm (including power connector)
Aluminum, heat-treated front panel.

€55.00

Description
Product Details

Check our website for further info about the module.

For documentation relating to older versions of this module please contact: support@befaco.org

Designed with love in Barcelona.

Current draw: 14mA on the +12V rail // 11mA on the -12V rail
Size | HP: 5HP
Depth (inc. connector) | mm: 33mm
Weight | g: 68g

Brand

Reference DIY009

16 other products in the same category:

Full Kits

Output V3 DIY Kit

DIY021

€72.00

DIY kit version of our new Output V3 Eurorack module. The kit includes all the necessary parts to make a completed module including a power cable and four of our bespoke Knurlies M3 rack screws. Our new Output Module is designed to be the master output for your modular system, providing an extra Cue Input to monitor any signal. FEATURES Left IN is...

Full Kits

CV Thing DIY Kit

DIY034

€160.00

DIY version of our CV Thing Module. CV Thing is a fully mappable CV to MIDI converter in just 6HP. Its based on our VCMC module, but aiming for small and compact performance rigs. It has eight inputs that can be mapped to any MIDI message quite easily thanks to its simple and intuitive user interface. CCs, Program change ,V/Oct to Note or Clock are some...

Out of stock

Full Kits

Hexmix DIY Kit

DIY017

€275.00

DIY kit version of our Hexmix Eurorack module. The kit includes all the necessary parts to make a completed module including power cable and four of our bespoke Knurlies M3 rack screws. Hexmix System is a six channel performance mixer specially designed for Eurorack. The system has two separate modules, the core of the mixer: Hexmix that has six...

View

Full Kits

Dual Attenuverter DIY Kit

Befaco

DIY007

€55.00

DIY kit version of our Dual Attenuverter Eurorack module. The kit includes all the necessary parts to make a completed module including power cable and two of our bespoke Knurlies M3 rack screws. The Dual Atenuverter is a CV/Audio utility module designed to atenuate, invert and apply offset to an input signal. The “ATENUVERTER” pot will multiply your...

Full Kits

Noise Plethora DIY Kit

DIY037

€210.00

DIY version of Noise Plethora Module. Noise Plethora is a multitimbral noise monster in 14HP.The module consists of three digital sound generators, followed by three analog multimode Filters. This combination makes it easy to sculpt different textures and noises and play with them intuitively and musically.The first two channels let you choose from...

Full Kits

VCMC DIY Kit

DIY031

€190.00

DIY version of our VCMC Module. VCMC is a voltage-controlled MIDI controller. A fully editable MIDI controller with eight faders and push-buttons. Each of them with a CV or Gate input associated to automate their functioning via external signals or to be configured independently for further control. Each control on VCMC can be edited on its OLED screen...

Full Kits

Burst DIY Kit

DIY020

€110.00

DIY kit version of our Burst Eurorack module. The kit includes all the necessary parts to make a completed module including power cable and four of our bespoke Knurlies M3 rack screws. Burst is a Pingable Trigger Burst generator with distribution, probability, and time division control. It will create multiplications of your triggers, leading to...

Full Kits

Percall DIY Kit

DIY033

€155.00

DIY kit version of our Percall Eurorack module. The kit includes all the necessary parts to make a completed module including power cable, four of our bespoke Knurlies M3 rack screws and Bananuts! Percall is a percussive oriented module that will shape four different sound sources into percussive sounds. Percall has four VCAs with dedicated decay...

Full Kits

BF-22 VCF DIY Kit

Befaco

DIY005

€130.00

DIY kit version of our BF-22 VCF Eurorack module. The kit includes all the necessary parts to make a completed module including a power cable and four of our bespoke Knurlies M3 rack screws. The BF-22 VCF is a dual Hi/Low-pass filter inspired by the Sallen-Key filter from the early MS-20. FEATURES The module features attenuverters...

Full Kits

Hex Mix VCA DIY Kit

DIY016

€170.00

DIY kit version of our Hex Mix VCA Eurorack module. The kit includes all the necessary parts to make a completed module including power cable and four of our bespoke Knurlies M3 rack screws. Hexmix VCA is a compact six channel VCA with a unique response curve range from logarithmic to linear and to exponential using a pot. All outputs are routed to...

Full Kits

Instrument Interface DIY Kit

DIY032

€135.00

DIY Version of our Instrument Interface Module. Instrument Interface is an eurorack pre-amp capable to bring any type of audio signal to modular levels thanks to its amplification circuit. The module can drive regular and condenser microphones (+48V Phantom Powered) as well as Instrument and Line signals with a very low distortion ratio. Instrument...

Full Kits

Rampage DIY Kit

Befaco

DIY004

€160.00

DIY kit version of our Rampage Eurorack module. The kit includes all the necessary parts to make a completed module including a power cable and four of our bespoke Knurlies M3 rack screws. Rampage is Befaco’s approach to an old invention: the Serge/Buchla ramp generator. We took the idea of a “patch programmable” function generator/processor, put two...

Full Kits

ACDC DIY Kit

DIY039

€175.00

DIY version of our ACDC Eurorack module AC/DC is a class-compliant DC coupled audio interface in Eurorack format. With its 6 HP, it is perfect for live performance and travel Rigs.Based on Rebel Technology OWL platform, It allows sending and receiving both CV and Audio at 16 bits 48 kHz. as well as load patches from Rebel’s library.It is compatible with...

Full Kits

Spring Reverb DIY Kit

Befaco

DIY011

€145.00

DIY kit version of our Spring Reverb Eurorack module. The kit includes all the necessary parts to make a completed module including power cable and four of our bespoke Knurlies M3 rack screws. REVERB TANK INCLUDED This is our take on an analog spring reverb module. Featuring VCAs for the two available inputs (with different routing), CV control for...

Full Kits

InAmp DIY Kit

DIY024

€70.00

DIY kit version of our InAmp Eurorack module. The kit includes all the necessary parts to make a completed module including power cable and our bespoke Knurlies M3 rack screws. Inamp is a dual pre-amp in just 4 HPs. Featuring 6,3 Jacks inputs as well as Minijacks. Both inputs are summed so you can use them at the same time as an input mixer. The unit is...

Full Kits

VC ADSR DIY Kit

Befaco

DIY013

€105.00

DIY kit version of our VC ADSR Eurorack module. The kit includes all the necessary parts to make a completed module including a power cable and four of our bespoke Knurlies M3 rack screws. Assembled Version of our VC ADSR module. Knurlies included, The VC ADSR is our take on the classic ADSR: now smaller, more powerful, and user friendly. FEATURES...