1U STMix DIY KIt

1U STMix DIY KIt

STMix is a four-channel stereo mixer in 28hp and 1U format. It can work independently or as an expansion of our Hexmix module via the six-pin connector located in the back. The module is designed under the Intellijel 1U format.

€60.00

Description
Product Details

FEATURES

Four channels stereo inputs with volume control.
AC Coupled inputs to improve audio performance.
Output clipping LED indicators.
Connector at the back to interface with the Hexmix module.
1U Intellijel format

SPECS

Current needs: +12V: 30mA, -12V: 30mA
Width: 28 HP
Depth: 20mm (including power connector)
Aluminum, heat-treated front panel
Designed, kits prepared and completed modules assembled in Barcelona

Reference 1UDIY022

16 other products in the same category:

Hexpander DIY Kit

Full Kits

Hexpander DIY Kit

€235.00

DIY kit version of our Hexpander Eurorack module. The kit includes all the necessary parts to make a completed module including power cable, Hexmix VCA connector cable and four of our bespoke Knurlies M3 rack screws. Hexpander adds great functionality to Hexmix module. Featuring Three aux send with stereo returns, individual outputs for each channel,...

Even VCO DIY Kit

Full Kits

Even VCO DIY Kit

€125.00

DIY kit version of our EvenVCO Eurorack module. The kit includes all the necessary parts to make a completed module including power cable and four of our bespok Knurlies M3 rack screws. The Even VCO is a voltage controlled oscillator which offers stability even in the case of power supply fluctuations. 10 position octave selector 1 cent precision...

InAmp DIY Kit

Full Kits

InAmp DIY Kit

€70.00

DIY kit version of our InAmp Eurorack module. The kit includes all the necessary parts to make a completed module including power cable and our bespoke Knurlies M3 rack screws. Inamp is a dual pre-amp in just 4 HPs. Featuring 6,3 Jacks inputs as well as Minijacks. Both inputs are summed so you can use them at the same time as an input mixer. The unit is...

Muxlicer DIY Kit

Full Kits

Muxlicer DIY Kit

€132.23

DIY kit version of our Muxlicer Eurorack module. The kit includes all the necessary parts to make a completed module including power cable and four of our bespoke Knurlies M3 rack screws. Muxlicer is a sequential signal processor designed to add a huge range of special functions to your modular setup in the minimum space. Is divided into three main...

Morphader DIY Kit

Presoldered KIts

Morphader DIY Kit

€145.00

DIY version of our Morphader module. This is a pre-soldered kit. All the SMT components are already soldered on the board. Assembly Manual and documentation. Morphader is a performative tool designed to make multichannel CV/Audio crossfade easy and comfortable. Fading from one quad CV/audio scene to another. The core of the module has four CV-controlled...

Divkid Mutes - DIY Kit

Divkid

Divkid Mutes - DIY Kit

€80.00

DIY kit of the Divkid Mutes module. Mutes goes above and beyond basic muting by allowing you to split groups of signals to multiple destinations, making it great for FX dub performing and varied signal routing. Vactrols on the circuit gives to the switching a pleasing decay for both audio and modulation as well a totally click free muting. Three-position...

Motion MTR - DIY Kit

Friends

Motion MTR - DIY Kit

€100.00

DIY version of our Motion MTR module Motion MTR allows you to mix, attenuate and invert signals while having clear visual feedback of their levels. Each channel can function as: Audio level control with VU meter CV attenuator with voltage meter CV inverter with voltage meter Each input is connected to 10V, so you can use each of them to generate...

MEX DIY Kit

Full Kits

MEX DIY Kit

€52.00

DIY version of our Mex module. MEX, is a gate expander for Muxlicer! It adds a new line of gates to Muxlicer’s sequence, where you can choose to turn off the step, output the same number of gates as muxlicer, or send just one. A very simple concept, that provides great flexibility! And the greatest thing: you can daisy chain them so you can add as many as...

Divkid Stereo Strip - DIY kit

Divkid

Divkid Stereo Strip - DIY kit

€105.00

DIY version of the Divkid Stereo Strip module. Stereo Strip is a 6HP Eurorack module that builds upon the idea of a studio or mixer channel strip for a modular environment. If you’re new to the term ‘channel strip’ think of a single channel strip from a mixing desk. You’ll find amplification, EQ, panning, and level control options. Stereo Strip builds on...

1U STAmp DIY Kit

Full Kits

1U STAmp DIY Kit

€57.00

ST Amp is a 1U stereo amplifier designed to boost your external signals into modular levels. The module is designed under the Intellijel 1U format and uses the same pinout, making it fully compatible with the Intelljel case’s rear connectors.

Sampling Modulator DIY Kit

Full Kits

Sampling Modulator DIY Kit

€110.00

DIY kit version of our Sampling Modulator Eurorack module. The kit includes all the necessary parts to make a completed module including power cable and two of our bespoke Knurlies M3 rack screws. The Sampling Modulator is a multi-function module that lies somewhere between a VCO, a Sample & Hold, and an 8 step trigger sequencer. FEATURES Sequencer...

CV Thing DIY Kit

Full Kits

CV Thing DIY Kit

€160.00

DIY version of our CV Thing Module. CV Thing is a fully mappable CV to MIDI converter in just 6HP. Its based on our VCMC module, but aiming for small and compact performance rigs. It has eight inputs that can be mapped to any MIDI message quite easily thanks to its simple and intuitive user interface. CCs, Program change ,V/Oct to Note or Clock are some...

VC ADSR DIY Kit

Full Kits

VC ADSR DIY Kit

€105.00

DIY kit version of our VC ADSR Eurorack module. The kit includes all the necessary parts to make a completed module including a power cable and four of our bespoke Knurlies M3 rack screws. Assembled Version of our VC ADSR module. Knurlies included, The VC ADSR is our take on the classic ADSR: now smaller, more powerful, and user friendly. FEATURES...

1U Out DIY Kit

Full Kits

1U Out DIY Kit

€55.00

Out is a 1U stereo output module designed to convert audio signals from your modular to line-levels. The module is designed to be used on cases with onboard Jack connectors or Intellijel 7U and Palette series, as it uses the same pinout. The module also includes a high-quality Headphone amplifier with an auxiliar monitoring CUE input.

Instrument Interface DIY Kit

Full Kits

Instrument Interface DIY Kit

€135.00

DIY Version of our Instrument Interface Module. Instrument Interface is an eurorack pre-amp capable to bring any type of audio signal to modular levels thanks to its amplification circuit. The module can drive regular and condenser microphones (+48V Phantom Powered) as well as Instrument and Line signals with a very low distortion ratio. Instrument...

Noise Plethora DIY Kit

Full Kits

Noise Plethora DIY Kit

€210.00

DIY version of Noise Plethora Module. Noise Plethora is a multitimbral noise monster in 14HP.The module consists of three digital sound generators, followed by three analog multimode Filters. This combination makes it easy to sculpt different textures and noises and play with them intuitively and musically.The first two channels let you choose from...