MEX DIY Kit

MEX DIY Kit

DIY version of our Mex module.

MEX, is a gate expander for Muxlicer! It adds a new line of gates to Muxlicer’s sequence, where you can choose to turn off the step, output the same number of gates as muxlicer, or send just one. A very simple concept, that provides great flexibility! And the greatest thing: you can daisy chain them so you can add as many as desired!!

Last items in stock

€52.00

Description
Product Details

FEATURES

Extra 8-Step Gate Sequencer for Muxlicer
Three modes of operation are selectable per step.
Several units can be daisy-chained to create entire sets of different patterns.
Powered directly from the Muxlicer.

Reference DIY038

You might also like

Muxlicer DIY Kit

Full Kits

Muxlicer DIY Kit

€132.23

DIY kit version of our Muxlicer Eurorack module. The kit includes all the necessary parts to make a completed module including power cable and four of our bespoke Knurlies M3 rack screws. Muxlicer is a sequential signal processor designed to add a huge range of special functions to your modular setup in the minimum space. Is divided into three main...

Kickall DIY Kit

Full Kits

Kickall DIY Kit

€115.70

DIY kit version of our Kickall Eurorack module. The kit includes all the necessary parts to make a completed module including PCB, components, aluminium front panel, power cable and a set of our bespoke Knurlies M3 rack screws. Kickall is a 6HP compact synth voice that features everything needed to make a big fat Kick sound: A stable VCO that tracks...

16 other products in the same category:

Spring Reverb DIY Kit

Full Kits

Spring Reverb DIY Kit

€145.00

DIY kit version of our Spring Reverb Eurorack module. The kit includes all the necessary parts to make a completed module including power cable and four of our bespoke Knurlies M3 rack screws. REVERB TANK INCLUDED This is our take on an analog spring reverb module. Featuring VCAs for the two available inputs (with different routing), CV control for...

Instrument Interface DIY Kit

Full Kits

Instrument Interface DIY Kit

€135.00

DIY Version of our Instrument Interface Module. Instrument Interface is an eurorack pre-amp capable to bring any type of audio signal to modular levels thanks to its amplification circuit. The module can drive regular and condenser microphones (+48V Phantom Powered) as well as Instrument and Line signals with a very low distortion ratio. Instrument...

STMix DIY Kit

Full Kits

STMix DIY Kit

€70.00

DIY kit version of our STMix Eurorack module. The kit includes all the necessary parts to make a completed module including PCB, components, aluminium front panel, power cable and a set of our bespoke Knurlies M3 rack screws. STMix is a compact 4 channel stereo mixer with an auxiliary input. This input will allow us to chain a few of them or to insert...

1U STAmp DIY Kit

Full Kits

1U STAmp DIY Kit

€57.00

ST Amp is a 1U stereo amplifier designed to boost your external signals into modular levels. The module is designed under the Intellijel 1U format and uses the same pinout, making it fully compatible with the Intelljel case’s rear connectors.

1U Out DIY Kit

Full Kits

1U Out DIY Kit

€55.00

Out is a 1U stereo output module designed to convert audio signals from your modular to line-levels. The module is designed to be used on cases with onboard Jack connectors or Intellijel 7U and Palette series, as it uses the same pinout. The module also includes a high-quality Headphone amplifier with an auxiliar monitoring CUE input.

ACDC DIY Kit

Out of stock

Full Kits

ACDC DIY Kit

€175.00

DIY version of our ACDC Eurorack module AC/DC is a class-compliant DC coupled audio interface in Eurorack format. With its 6 HP, it is perfect for live performance and travel Rigs.Based on Rebel Technology OWL platform, It allows sending and receiving both CV and Audio at 16 bits 48 kHz. as well as load patches from Rebel’s library.It is compatible with...

View

Chopping Kinky DIY Kit

Full Kits

Chopping Kinky DIY Kit

€110.00

DIY kit version of our Chopping Kinky Eurorack module. The kit includes all the necessary parts to make a completed module including a power cable and two of our bespoke Knurlies M3 rack screws. Chopping kinky is a voltage controllable, dual-channel wavefolder. As a unique feature, it has a chop out that will choose between both channels with a zero...

Divkid Mutes - DIY Kit

Divkid

Divkid Mutes - DIY Kit

€80.00

DIY kit of the Divkid Mutes module. Mutes goes above and beyond basic muting by allowing you to split groups of signals to multiple destinations, making it great for FX dub performing and varied signal routing. Vactrols on the circuit gives to the switching a pleasing decay for both audio and modulation as well a totally click free muting. Three-position...

Hex Mix VCA DIY Kit

Full Kits

Hex Mix VCA DIY Kit

€170.00

DIY kit version of our Hex Mix VCA Eurorack module. The kit includes all the necessary parts to make a completed module including power cable and four of our bespoke Knurlies M3 rack screws. Hexmix VCA is a compact six channel VCA with a unique response curve range from logarithmic to linear and to exponential using a pot. All outputs are routed to...

VCMC DIY Kit

Full Kits

VCMC DIY Kit

€190.00

DIY version of our VCMC Module. VCMC is a voltage-controlled MIDI controller. A fully editable MIDI controller with eight faders and push-buttons. Each of them with a CV or Gate input associated to automate their functioning via external signals or to be configured independently for further control. Each control on VCMC can be edited on its OLED screen...

VC Slew Limiter DIY Kit

Full Kits

VC Slew Limiter DIY Kit

€55.00

DIY kit version of our VC Slew Limiter Eurorack module. The kit includes all the necessary parts to make a completed module including power cable and four of our bespoke Knurlies M3 rack screws. A voltage-controlled slew limiter, AKA Lag Processor. A slew limiter is a device that smoothes an incoming signal, limiting the maximum rate of the output...

Morphader DIY Kit

Presoldered KIts

Morphader DIY Kit

€145.00

DIY version of our Morphader module. This is a pre-soldered kit. All the SMT components are already soldered on the board. Assembly Manual and documentation. Morphader is a performative tool designed to make multichannel CV/Audio crossfade easy and comfortable. Fading from one quad CV/audio scene to another. The core of the module has four CV-controlled...

Crush Delay v3 DIY Kit

Full Kits

Crush Delay v3 DIY Kit

€130.00

DIY kit version of our Crush Delay v3 Eurorack module. The kit includes all the necessary parts to make a completed module including PCB, components, aluminum front panel, power cable, and a set of our bespoke Knurlies M3 rack screws. Crush Delay v3 is a special Echo-Delay unit based on the PT2399 IC, which is able to offer 400ms of clean delay and up...

Mixer DIY Kit

Full Kits

Mixer DIY Kit

€55.00

DIY kit version of our Mixer Eurorack module. The kit includes all the necessary parts to make a completed module including power cable and four of our bespoke Knurlies M3 rack screws. A four-channel mixer, suitable for audio or control signals. It features regular and inverted outputs as well as an LED level meter. Current needs: +12V: 21mA, -12V:...

Output V3 DIY Kit

Full Kits

Output V3 DIY Kit

€72.00

DIY kit version of our new Output V3 Eurorack module. The kit includes all the necessary parts to make a completed module including a power cable and four of our bespoke Knurlies M3 rack screws. Our new Output Module is designed to be the master output for your modular system, providing an extra Cue Input to monitor any signal. FEATURES Left IN is...

Pony VCO DIY Kit

Full Kits

Pony VCO DIY Kit

€150.00

DIY Version of our Pony VCO module. This is a pre-soldered DIY Kit. Pony VCO is a fully analog Thru-Zero oscillator with wavefolder and dedicated VCA in only 4HP. The module offers great stability and tuning capabilities thanks to its powerful core, based onSound Semiconductors IC. It comes with range selector, that allows it to go down to LFO range, as...