Top sellers

per page
DIY kit version of our STMix Eurorack module.  The kit includes all the necessary parts to make a completed module including PCB, components, aluminium front panel, power cable and a set of our bespoke Knurlies M3 rack screws.http://www.befaco.org/stmix/
65,29 €
DIY kit version of our MIDI Thing Eurorack module.  The kit includes all the necessary parts to make a completed module including power cable and four of our bespoke Knurlies M3 rack screws. In order to facilitate easy assembly all our kits come with hex nuts and not with round nuts seen on our assembled modules.
125,00 €
Set of two 3U side panels with M5 screws
12,81 €
DIY kit version of our Dual Attenuverter Eurorack module.  The kit includes all the necessary parts to make a completed module including power cable and two of our bespoke Knurlies M3 rack screws. In order to facilitate easy assembly all our kits come with hex nuts and not with round nuts seen on our assembled modules.
55,00 €
Pack of three 1.5m Jack-to-Minijack cables. Jack
9,88 €
Pack of 25 Bananuts in Red Colour NOTE: Buy 8 packs or more to get a 25% discount.
10,00 €
Pack of three large (25mm) black MXR style, fluted control knobs
2,85 €
DIY kit version of our Joystick Eurorack module.  The kit includes all the necessary parts to make a completed module including power cable and our bespoke Knurlies M3 rack screws. In order to facilitate easy assembly all our kits come with hex nuts and not with round nuts seen on our assembled modules.
97,48 €
IDC Power Connector | Male, 16pin (2x8), Vertical | x5 units
2,02 €
Custom Wrench Tool for Bananuts
5,00 €
Joystick controller. B10k Dual-gang potentiometer.
13,80 €
Pack of three medium (19mm) black MXR style, fluted control knobs
2,44 €
DIY kit version of our BF-22 VCF Eurorack module.  The kit includes all the necessary parts to make a completed module including power cable and four of our bespoke Knurlies M3 rack screws. In order to facilitate easy assembly all our kits come with hex nuts and not with round nuts seen on our assembled modules. http://www.befaco.org/bf-22/
129,71 €
Pack of 100 Knurlies Eurorack M2.5 Rack Screws
31,98 €
DIY kit version of our Crush Delay v3 Eurorack module.  The kit includes all the necessary parts to make a completed module including PCB, components, aluminium front panel, power cable and a set of our bespoke Knurlies M3 rack screws. http://www.befaco.org/crush-delay-v3/
130,00 €
PCB set and aluminium front panel for our VC ADSR module. See module details, documentation and B.O.M. files here. Beware that we use potentiometers that are sometimes hard to find, however you can get them here.
31,12 €
DIY kit version of our Chopping Kinky Eurorack module.  The kit includes all the necessary parts to make a completed module including power cable and two of our bespoke Knurlies M3 rack screws. In order to facilitate easy assembly all our kits come with hex nuts and not with round nuts seen on our assembled modules.
119,83 €
DIY kit version of our Hexmix Eurorack module.  The kit includes all the necessary parts to make a completed module including power cable and four of our bespoke Knurlies M3 rack screws. In order to facilitate easy assembly all our kits come with hex nuts and not with round nuts seen on our assembled modules. http://www.befaco.org/hexmix/
275,00 €
Preprogramed ATMega328p with the latest firmware for MIDI Thing. No need of soldering skills, just replace existing IC for the new one.
3,00 €
Pack of 25 Bananuts in Black Colour NOTE: Buy 8 packs or more to get a 25% discount.
10,00 €
Assembled Version of our new Output module, ready to mount in your rack. Package include 12″ power cable and Knurlies. Worldwide Free Shipping.
119,83 €
DIY kit version of our Burst Eurorack module.  The kit includes all the necessary parts to make a completed module including power cable and four of our bespoke Knurlies M3 rack screws. In order to facilitate easy assembly all our kits come with hex nuts and not with round nuts seen on our assembled modules.
107,44 €
PCB set and aluminium front panel for our Even VCO module. See module details, documentation and B.O.M. files here. Beware we use potentiometers that sometimes are hard to find, you can get them here. http://www.befaco.org/even-vco/
43,76 €
Pack of 3x Medium Fluted/MXR-style Knob (White) (19mm).
2,44 €
Pack of 25 Bananuts in Blue Colour NOTE: Buy 8 packs or more to get a 25% discount.
10,00 €
Pack of 25 Bananuts in Yellow Colour NOTE: Buy 8 packs or more to get a 25% discount.
10,00 €
DIY kit version of our Regulated Power Bus module. Package includes all the necessary parts to assemble the unit.
42,98 €
DIY kit version of our Hexpander Eurorack module.  The kit includes all the necessary parts to make a completed module including power cable, Hexmix VCA connector cable and four of our bespoke Knurlies M3 rack screws. In order to facilitate easy assembly all our kits come with hex nuts and not with round nuts seen on our assembled modules....
235,00 €
Pack of five clear Davies style control knobs
2,85 €
Out of stock
PCB set and aluminium front panel for our Chopping Kinky module. See module details, documentation and B.O.M. files here. Beware that we use potentiometers that are sometimes hard to find, however you can get them here.
37,00 €
DIY Version of our Instrument Interface Module.http://www.befaco.org/i4-instrument-interface/
130,00 €
Assembled Version of our VC ADSR module, ready to mount in your rack. Package include 12″ power cable and Knurlies Worldwide Free Shipping.
164,46 €
Assembled Version of our STMix module, ready to mount in your rack. Package include 12″ power cable and Knurlies. Worldwide Free Shipping. http://www.befaco.org/stmix/
125,00 €
Pack of five gray Davies style control knobs
2,85 €
PCB set and aluminium front panel for our A*B+C module. See module details, documentation and B.O.M. files here. Beware that we use potentiometers that are sometimes hard to find, you can get them here.
27,23 €
Pack of 25 Bananuts in White Colour NOTE: Buy 8 packs or more to get a 25% discount.
10,00 €
Threaded strip with 84 threads (M3, for metrical 3mm screws). The strip has to be inserted into rails (e.g. SB-rails) and allow you mounting Eurorack modules to the rails.
4,13 €
Out of stock
Pack of 25 Bananuts in Green Colour NOTE: Buy 8 packs or more to get a 25% discount.
10,00 €
DIY kit version of our Sampling Modulator Eurorack module.  The kit includes all the necessary parts to make a completed module including power cable and two of our bespoke Knurlies M3 rack screws. In order to facilitate easy assembly all our kits come with hex nuts and not with round nuts seen on our assembled modules.
120,00 €
PCB set and aluminium front panel for our Dual Attenuverter module. See module details, documentation and B.O.M. files here. Beware that we use potentiometers that are sometimes hard to find, however you can get them here.
23,10 €
Showing 49 - 96 of 373 items