Top sellers

per page
Pack of three 1.5m Jack-to-Minijack cables. Jack
9,88 €
DIY kit version of our Muxlicer Eurorack module.  The kit includes all the necessary parts to make a completed module including power cable and four of our bespoke Knurlies M3 rack screws. In order to facilitate easy assembly all our kits come with hex nuts and not with round nuts seen on our assembled modules.
132,23 €
PCB set and aluminium front panel for our VC ADSR module. See module details, documentation and B.O.M. files here. Beware that we use potentiometers that are sometimes hard to find, however you can get them here.
31,12 €
IDC Power Connector | Male, 16pin (2x8), Vertical | x5 units
2,02 €
Joystick controller. B10k Dual-gang potentiometer.
13,80 €
DIY kit version of our Chopping Kinky Eurorack module.  The kit includes all the necessary parts to make a completed module including power cable and two of our bespoke Knurlies M3 rack screws. In order to facilitate easy assembly all our kits come with hex nuts and not with round nuts seen on our assembled modules.
119,83 €
DIY kit version of our Joystick Eurorack module.  The kit includes all the necessary parts to make a completed module including power cable and our bespoke Knurlies M3 rack screws. In order to facilitate easy assembly all our kits come with hex nuts and not with round nuts seen on our assembled modules.
97,48 €
DIY kit version of our Hexmix Eurorack module.  The kit includes all the necessary parts to make a completed module including power cable and four of our bespoke Knurlies M3 rack screws. In order to facilitate easy assembly all our kits come with hex nuts and not with round nuts seen on our assembled modules.
275,00 €
Pack of three medium (19mm) black MXR style, fluted control knobs
2,44 €
Pack of 100 Knurlies Eurorack M2.5 Rack Screws
31,98 €
DIY kit version of our BF-22 VCF Eurorack module.  The kit includes all the necessary parts to make a completed module including power cable and four of our bespoke Knurlies M3 rack screws. In order to facilitate easy assembly all our kits come with hex nuts and not with round nuts seen on our assembled modules.
129,71 €
DIY kit version of our Dual Attenuverter Eurorack module.  The kit includes all the necessary parts to make a completed module including power cable and two of our bespoke Knurlies M3 rack screws. In order to facilitate easy assembly all our kits come with hex nuts and not with round nuts seen on our assembled modules.
55,00 €
Pack of three, six-way, Befaco-branded multiples
9,88 €
Pack of five clear Davies style control knobs
2,85 €
Out of stock
Assembled Version of our new Output module, ready to mount in your rack. Package include 12″ power cable and Knurlies. Worldwide Free Shipping.
119,83 €
Assembled Version of our VC ADSR module, ready to mount in your rack. Package include 12″ power cable and Knurlies Worldwide Free Shipping.
164,46 €
DIY kit version of our Hexpander Eurorack module.  The kit includes all the necessary parts to make a completed module including power cable, Hexmix VCA connector cable and four of our bespoke Knurlies M3 rack screws. In order to facilitate easy assembly all our kits come with hex nuts and not with round nuts seen on our assembled modules.
235,00 €
Pack of 3x Medium Fluted/MXR-style Knob (White) (19mm).
2,44 €
PCB set and aluminium front panel for our Chopping Kinky module. See module details, documentation and B.O.M. files here. Beware that we use potentiometers that are sometimes hard to find, however you can get them here.
37,00 €
DIY kit version of our Burst Eurorack module.  The kit includes all the necessary parts to make a completed module including power cable and four of our bespoke Knurlies M3 rack screws. In order to facilitate easy assembly all our kits come with hex nuts and not with round nuts seen on our assembled modules.
107,44 €
PCB set and aluminium front panel for our Even VCO module. See module details, documentation and B.O.M. files here. Beware we use potentiometers that sometimes are hard to find, you can get them here.
43,76 €
Pack of three large (25mm) black MXR style, fluted control knobs
2,85 €
Preprogramed ATMega328p with the latest firmware for MIDI Thing. No need of soldering skills, just replace existing IC for the new one.
3,00 €
DIY kit version of our STMix Eurorack module.  The kit includes all the necessary parts to make a completed module including PCB, components, aluminium front panel, power cable and a set of our bespoke Knurlies M3 rack screws.
65,29 €
PCB set and aluminium front panel for our A*B+C module. See module details, documentation and B.O.M. files here. Beware that we use potentiometers that are sometimes hard to find, you can get them here.
27,23 €
This purchase reserves a spot in our upcoming workshop at Native space Berlin. Once you have completed the transaction please send a mail to [email protected] stating which module you wish to reserve. You can add also a note during the purchase stating the module or modules. This deposit will be deducted from the kit price which you can pay at the workshop....
20,00 €
DIY kit version of our Crush Delay v3 Eurorack module.  The kit includes all the necessary parts to make a completed module including PCB, components, aluminium front panel, power cable and a set of our bespoke Knurlies M3 rack screws.
130,00 €
Pack of five gray Davies style control knobs
2,85 €
DIY kit version of our Regulated Power Bus module. Package includes all the necessary parts to assemble the unit.
42,98 €
PCB set and aluminium front panel for our Dual Attenuverter module. See module details, documentation and B.O.M. files here. Beware that we use potentiometers that are sometimes hard to find, however you can get them here.
23,10 €
DIY kit version of our Sampling Modulator Eurorack module.  The kit includes all the necessary parts to make a completed module including power cable and two of our bespoke Knurlies M3 rack screws. In order to facilitate easy assembly all our kits come with hex nuts and not with round nuts seen on our assembled modules.
120,00 €
PCB set and aluminium front panel for our Out V3 module. See module details, documentation and B.O.M. files here.
25,00 €
Assembled Version of our STMix module, ready to mount in your rack. Package include 12″ power cable and Knurlies. Worldwide Free Shipping.
125,00 €
Out of stock
DIY kit of our portable 98HP skiff with integrated power supply and bus. Includes power supply, bus, rails and 70x hex nuts.
150,00 €
PCB set and aluminium front panel for our Hex Mix VCA module. See module details, documentation and B.O.M. files here. Beware that we use potentiometers that are sometimes hard to find, however you can get them here.
57,00 €
Assembled Version of our Midi Thing module, ready to mount in your rack.Package include 12″ power cable and Knurlies.   Worldwide Free Shipping.
209,92 €
PCB set and aluminium front panel for our Joystick module. See module details, documentation and B.O.M. files here. Beware we use potentiometers that sometimes are hard to find, you can get them here.
26,40 €
PCB set and aluminium front panel for our Mixer module. See module details, documentation and B.O.M. files here. Beware that we use potentiometers that are sometimes hard to find, however you can get them here.
23,10 €
Pack of 25 Bananuts in Red Colour NOTE: Buy 8 packs or more to get a 25% discount.
10,00 €
DIY kit version of our Instrument Interface Eurorack module.  The kit includes all the necessary parts to make a completed module including power cable and four of our bespoke Knurlies M3 rack screws. In order to facilitate easy assembly all our kits come with hex nuts and not with round nuts seen on our assembled modules.
120,00 €
Out of stock
DIY kit version of our VC Slew Limiter Eurorack module.  The kit includes all the necessary parts to make a completed module including power cable and four of our bespoke Knurlies M3 rack screws. In order to facilitate easy assembly all our kits come with hex nuts and not with round nuts seen on our assembled modules.
60,00 €
Showing 49 - 96 of 367 items