1U STAmp Assembled Module

1U STAmp Assembled Module

1U STAmp Assembled Module

ST Amp is a 1U stereo amplifier designed to boost your external signals into modular levels. The module is designed under the Intellijel 1U format and uses the same pinout, making it fully compatible with the Intelljel case’s rear connectors.

€76.00

Description
Product Details

FEATURES

Stereo amplifier and signal booster.
Three selectable gain modes: x1, x5 and x10
Level meter LEDs
Fully compatible with Intellijel’s 7U and Palette cases.
1U Intellijel format.

SPECS

Current needs: +12V: 30mA, -12V: 30mA
Width: 10 HP
Depth: 37mm (including power connector)
Aluminiun, heat-treated front panel
Designed, kits prepared and completed modules assembled in Barcelona

Reference 1U042

16 other products in the same category:

Sampling Modulator...

Assembled Modules

Sampling Modulator Assembled Module

€200.00

Assembled Version of our Sampling Modulator module, ready to mount in your rack. The Sampling Modulator is a multi-function module that lies somewhere between a VCO, a Sample & Hold, and an 8 step trigger sequencer. FEATURES Sequencer Clocked Sample & Hold Analog Down-sampling Effect Sampling Modulator/Shaper 8 Step Trigger Sequencer Unusual...

Spring Reverb Assembled Module

Assembled Modules

Spring Reverb Assembled Module

€215.00

Assembled Version of our Spring Reverb module, ready to mount in your rack. Note: Reverb Tank Included! This is our take on an analog spring reverb module. Featuring VCAs for the two available inputs (with different routing), CV control for DRY/WET and visual feedback for signal levels at input and output of the tank. Two CV-controlled audio inputs. In 1...

Divkid Mutes - Assembled...

Divkid

Divkid Mutes - Assembled Module

€95.00

Mutes goes above and beyond basic muting by allowing you to split groups of signals to multiple destinations, making it great for FX dub performing and varied signal routing. Vactrols on the circuit gives to the switching a pleasing decay for both audio and modulation as well a totally click free muting. Three-position switch: MOMENTARY signal...

CV Thing Assembled Module

Assembled Modules

CV Thing Assembled Module

€245.00

Assembled version of our CV Thing module. Knurlies included! Cv thing is a fully mappable CV to MIDI converter in just 6HP. Its based on our VCMC module, but aiming for small and compact performance rigs. It has eight inputs that can be mapped to any MIDI message quite easily thanks to its simple and intuitive user interface. Ccs, Program change,v/oct to...

Chopping Kinky

Assembled Modules

Chopping Kinky Assembled Module

€200.00

Assembled Version of our Dual-wavefolder Chopping Kinky, ready to mount in your rack. Chopping kinky is a voltage controllable, dual-channel wavefolder. As a unique feature, it has a chop out that will choose between both channels with a zero cross detector or an external gate. FEATURES Two unique wavefolder circuits Two CV inputs per channel, one with...

STMix Assembled Module

Assembled Modules

STMix Assembled Module

€130.00

Assembled Version of our STMix module, ready to mount in your rack. STMix is a compact 4 channel stereo mixer with an auxiliary input. This input will allow us to chain a few of them or to insert an extra fifth input. This module is compatible with our Hexmix System and can be internally connected to the Hexmix module to add the output of STMix to your...

InAmp Assembled Module

Assembled Modules

InAmp Assembled Module

€130.00

Assembled Version of our dual-channel InAmp, ready to mount in your rack. Inamp is a dual pre-amp in just 4 HPs. Featuring 6,3 Jacks inputs as well as Minijacks. Both inputs are summed so you can use them at the same time as an input mixer. The unit is designed to amplify up to x20 the input signal, allowing to amplify most of the music machines out there...

Divkid Stereo Strip -...

Divkid

Divkid Stereo Strip - Assembled Module

€185.00

Stereo Strip is a 6HP Eurorack module that builds upon the idea of a studio or mixer channel strip for a modular environment. If you’re new to the term ‘channel strip’ think of a single channel strip from a mixing desk. You’ll find amplification, EQ, panning, and level control options. Stereo Strip builds on those ideas by adding voltage control for...

1U STMix Assembled Module

Assembled Modules

1U STMix Assembled Module

€92.00

STMix is a four-channel stereo mixer in 28hp and 1U format. It can work independently or as an expansion of our Hexmix module via the six-pin connector located in the back. The module is designed under the Intellijel 1U format.

Hexmix Assembled Module

Assembled Modules

Hexmix Assembled Module

€410.00

Assembled Version of our Hexmix module, ready to mount in your rack. Hexmix System is a six channel performance mixer specially designed for Eurorack. The system has two separate modules, the core of the mixer: Hexmix that has six channels with three band EQ, mute, pan and EQ section on the master, and Hexpander that add three auxiliar sends per channel,...

Morphader Assembled Module

Assembled Modules

Morphader Assembled Module

€210.00

Assembled version of our Morphader module. Morphader is a performative tool designed to make multichannel CV/Audio crossfade easy and comfortable. Fading from one quad CV/audio scene to another. The core of the module has four CV-controlled crossfaders, each with their individual control and a master fader to control them all. The module mixes the four...

Percall Assembled Module

Assembled Modules

Percall Assembled Module

€235.00

Assembled Version of our Percall module, ready to mount in your rack. Percall is a percussive oriented module that will shape four different sound sources into percussive sounds. Percall has four VCAs with dedicated decay envelopes and a mixer, so you can prepare a percussion submix. Added strength input will provide extra dynamics to the sounds! To round...

Dual Attenuverter Assembled...

Assembled Modules

Dual Attenuverter Assembled Module

€95.00

Assembled Version of our Dual Atenuverter module, ready to mount in your rack. The Dual Atenuverter is a CV/Audio utility module designed to atenuate, invert and apply offset to an input signal. The “ATENUVERTER” pot will multiply your signal by 1 when turned clockwise and -1 when turned anti-clockwise. The “OFFSET” control can add +/- 10V DC to the...

Hex Mix VCA

Assembled Modules

Hex Mix VCA Assembled Module

€272.00

Assembled Version of our Hex Mix VCA module, ready to mount in your rack. Hexmix VCA is a compact six channel VCA with a unique response curve range from logarithmic to linear and to exponential using a pot. All outputs are routed to output six to act as a mixer, with normalization of each one to remove each channel from the Mix. FEATURES Hexmix VCA can...

VC Slew Limiter Assembled...

Assembled Modules

VC Slew Limiter Assembled Module

€110.00

Assembled Version of our Slew Limiter module, ready to mount in your rack. A voltage-controlled slew limiter, AKA Lag Processor. A slew limiter is a device that smoothes an incoming signal, limiting the maximum rate of the output voltage over time. It is widely used with pitch CVs to obtain portamento and CV slides, but is also very useful for converting...

Motion MTR - Assembled Module

Friends

Motion MTR - Assembled Module

€130.00

Motion MTR allows you to mix, attenuate and invert signals while having clear visual feedback of their levels. Each channel can function as: Audio level control with VU meter CV attenuator with voltage meter CV inverter with voltage meter Each input is connected to 10V, so you can use each of them to generate fixed voltages. Also, the outputs of...