Mixer Assembled Module

Assembled Version of our Mixer module, ready to mount in your rack.

A four-channel mixer, suitable for audio or control signals. It features regular and inverted outputs as well as an LED level meter.

Current needs: +12V: 21mA, -12V: 10mA
Width: 5 HP
Depth: 20mm (including power connector)
Aluminiun, heat-treated front panel.

€90.00

Description
Product Details

Check our website for further info about the module.

For documentation relating to older versions of this module please contact: support@befaco.org

Designed and assembled in Barcelona.

This module is also available as DIY Kit.

Current draw: 14mA on the +12V rail // 11mA on the -12V rail
Size | HP: 5HP
Depth (inc. connector) | mm: 33mm
Weight | g: 164g

Brand

Reference BF009

16 other products in the same category:

Divkid

Divkid Stereo Strip - Assembled Module

DK002

€185.00

Stereo Strip is a 6HP Eurorack module that builds upon the idea of a studio or mixer channel strip for a modular environment. If you’re new to the term ‘channel strip’ think of a single channel strip from a mixing desk. You’ll find amplification, EQ, panning, and level control options. Stereo Strip builds on those ideas by adding voltage control for...

Assembled Modules

STMix Assembled Module

BF022

€130.00

Assembled Version of our STMix module, ready to mount in your rack. STMix is a compact 4 channel stereo mixer with an auxiliary input. This input will allow us to chain a few of them or to insert an extra fifth input. This module is compatible with our Hexmix System and can be internally connected to the Hexmix module to add the output of STMix to your...

Assembled Modules

VC ADSR Assembled Module

Befaco

BF013

€165.00

Assembled Version of our VC ADSR module. Knurlies included, The VC ADSR is our take on the classic ADSR: now smaller, more powerful, and user friendly. FEATURES Voltage-controlled stages with manual control. Gate output on each stage of the envelope. Push-button and Gate/Trigger input Control of the response curve between each stage of the envelope...

Assembled Modules

Instrument Interface Assembled Module

BF032

€205.00

Assembled version of our Instrument Interface module. Knurlies included! Instrument Interface is an eurorack pre-amp capable to bring any type of audio signal to modular levels thanks to its amplification circuit. The module can drive regular and condenser microphones (+48V Phantom Powered) as well as Instrument and Line signals with a very low distortion...

Assembled Modules

Hex Mix VCA Assembled Module

BF016

€272.00

Assembled Version of our Hex Mix VCA module, ready to mount in your rack. Hexmix VCA is a compact six channel VCA with a unique response curve range from logarithmic to linear and to exponential using a pot. All outputs are routed to output six to act as a mixer, with normalization of each one to remove each channel from the Mix. FEATURES Hexmix VCA can...

Assembled Modules

Muxlicer Assembled Module

BF019

€210.00

Assembled Version of our Muxlicer module, ready to mount in your rack. Muxlicer is a sequential signal processor designed to add a huge range of special functions to your modular setup in the minimum space. Is divided into three main blocks: a Digital Step Controller, a Gate Generator, and an Analog Switch (a.k.a. Mux/DeMux) The module is designed with a...

Assembled Modules

Spring Reverb Assembled Module

Befaco

BF011

€215.00

Assembled Version of our Spring Reverb module, ready to mount in your rack. Note: Reverb Tank Included! This is our take on an analog spring reverb module. Featuring VCAs for the two available inputs (with different routing), CV control for DRY/WET and visual feedback for signal levels at input and output of the tank. Two CV-controlled audio inputs. In 1...

Assembled Modules

BF-22 VCF Assembled Module

Befaco

BF005

€215.00

Assembled Version of our BF-22 module, ready to mount in your rack. The BF-22 VCF is a dual Hi/Low-pass filter inspired by the Sallen-Key filter from the early MS-20. FEATURES The module features attenuverters (inverter-attenuators) as an addition to the normal CV control for Cutoff and Resonance, and offers a little more presence in the Resonance than...

Assembled Modules

Joystick Assembled Module

Befaco

BF002

€152.00

Assembled Version of our Joystick module, ready to mount in your rack. A compact attenuverting (attenuator-inverter) joystick controller and Gate Generator. With it, you can generate and/or process two control voltages using only one hand. Provided controls for CV ranges and offset adjust the boundaries of your control, this way it never gets out of the...

Assembled Modules

Chopping Kinky Assembled Module

Befaco

BF015

€200.00

Assembled Version of our Dual-wavefolder Chopping Kinky, ready to mount in your rack. Chopping kinky is a voltage controllable, dual-channel wavefolder. As a unique feature, it has a chop out that will choose between both channels with a zero cross detector or an external gate. FEATURES Two unique wavefolder circuits Two CV inputs per channel, one with...

Assembled Modules

Sampling Modulator Assembled Module

Befaco

BF010

€200.00

Assembled Version of our Sampling Modulator module, ready to mount in your rack. The Sampling Modulator is a multi-function module that lies somewhere between a VCO, a Sample & Hold, and an 8 step trigger sequencer. FEATURES Sequencer Clocked Sample & Hold Analog Down-sampling Effect Sampling Modulator/Shaper 8 Step Trigger Sequencer Unusual...

Friends

Motion MTR - Assembled Module

MT001

€130.00

Motion MTR allows you to mix, attenuate and invert signals while having clear visual feedback of their levels. Each channel can function as: Audio level control with VU meter CV attenuator with voltage meter CV inverter with voltage meter Each input is connected to 10V, so you can use each of them to generate fixed voltages. Also, the outputs of...

Assembled Modules

Percall Assembled Module

BF033

€235.00

Assembled Version of our Percall module, ready to mount in your rack. Percall is a percussive oriented module that will shape four different sound sources into percussive sounds. Percall has four VCAs with dedicated decay envelopes and a mixer, so you can prepare a percussion submix. Added strength input will provide extra dynamics to the sounds! To round...

Assembled Modules

Rampage Assembled Module

Befaco

BF004

€275.00

Assembled Version of our Rampage module, ready to mount in your rack. Rampage is Befaco’s approach to an old invention: the Serge/Buchla ramp generator. We took the idea of a “patch programmable” function generator/processor, put two units in the same module and expanded them with new functions and ways to combine them: Slope detectors, analog logic...

Assembled Modules

Pony VCO Assembled Module 1U

1U040

€210.00

Assembled version of our Pony VCO module in 1U format. Pony VCO is a fully analog Thru-Zero oscillator with wavefolder and dedicated VCA in only 4HP. The module offers great stability and tuning capabilities thanks to its powerful core, based onSound Semiconductors 2130 IC. It comes with a range selector, that allows it to go down to LFO range, as well as...

Assembled Modules

1U Out Assembled Module

1U021

€86.00

Out is a 1U stereo output module designed to convert audio signals from your modular to line-levels. The module is designed to be used on cases with onboard Jack connectors or Intellijel 7U and Palette series, as it uses the same pinout. The module also includes a high-quality Headphone amplifier with an auxiliar monitoring CUE input.