PCB & Panels

Showing 1-36 of 36 item(s)

PCB & Panels

FxBoy DIY Cartridge

€5.00

This cart is designed to help you to do your own effect. Please check this documentation, we explain there the cart's layout, levels, some warnings and simple examples. The cart works like any other stripboard, with a couple of additions, a connected raw to GND and a few more to power rails. You get also the solder joints, having access to every cart pin....

PCB & Panels

InAmp PCB/Panel Set

PCB024

€22.00

PCB/Panel version of the InAmp Module. Inamp is a dual pre-amp in just 4 HPs. Featuring 6,3 Jacks inputs as well as Minijacks. Both inputs are summed so you can use them at the same time as an input mixer. The unit is designed to amplify up to x20 the input signal, allowing to amplify most of the music machines out there (Domestic line levels) as well as...

PCB & Panels

Pony VCO 1U - Pulp Logic Frontpanel

DIY1UPL040

€10.00

These are alternative Pony VCO panels with a Pulp Logic format. Pony VCO is a fully analog Thru-Zero oscillator with wavefolder and dedicated VCA in only 4HP.

PCB & Panels

Motion MTR 1U - Pulp Logic Frontpanel

DIY1UPLMT001

€10.00

These are alternative Motion MTR panels with a Pulp Logic format. Motion MTR allows you to mix, attenuate and invert signals while having clear visual feedback of their levels.

PCB & Panels

Out 1U - Pulp Logic Frontpanel

DIY1UPL021

€10.00

These are alternative OUT panels with a Pulp Logic format. Out is a stereo output module designed to convert audio signals from your modular to line-levels. The module is designed to be used on Pulp Logic cases, as it uses the same pinout. The module also includes a high-quality Headphone amplifier with an auxiliar monitoring CUE input.

PCB & Panels

STAmp 1U - Pulp Logic Frontpanel

DIY1UPL042

€10.00

These are alternative STAmp panels with a Pulp Logic format. STAmp is a stereo amplifier designed to boost your external signals into modular levels. The module is designed under the Pulp Logic format and uses the same pinout, making it fully compatible with the Pulp Logic’s cases rear connectors.

PCB & Panels

STMix 1U - Pulp Logic Frontpanel

DIY1UPL022

€10.00

These are alternative STMix panels with a Pulp Logic format. STMix is a four-channel stereo mixer in Pulp Logic 1U format. It can work independently or as an expansion of our Hexmix module via the six-pin connector located in the back. The module is designed under the Pulp Logic 1U format.

Out of stock

PCB & Panels

Pony VCO 1U Mod Kit

DIY1U040

€10.00

Front Panel Kit with the instructions to turn your Pony VCO 3U into a 1U module. Pony VCO is a fully analog Thru-Zero oscillator with wave-folder and dedicated VCA in only 4HP. The module offers great stability and tuning capabilities thanks to its powerful core, based onSound Semiconductors IC. It comes with a range selector, that allows it to go down...

View

PCB & Panels

Noise Plethora PCB/Panel Set

PCB037

€55.00

PCB/Panel version of Noise Plethora Module. This PCB/Panel set includes the audio codec and the pogo pins. Noise Plethora is a multitimbral noise monster in 14HP.The module consists of three digital sound generators, followed by three analog multimode Filters. This combination makes it easy to sculpt different textures and noises and play with them...

PCB & Panels

MEX PCB/Panel Set

PCB038

€22.00

SMD PCB/Panel set of our Mex module. This is an SMD PCB Set. Please be aware of that! BOM Files and further documentation. MEX, is a gate expander for Muxlicer! It adds a new line of gates to Muxlicer’s sequence, where you can choose to turn off the step, output the same number of gates as muxlicer, or send just one. A very simple concept, that provides...

PCB & Panels

Morphader PCB/Panel Set

PCB036

€42.00

PCB/Panel set of our Morphader module. This is an SMD PCB Set. Please be aware that this is a very dense module and challenging project! BOM Files and further documentation. Morphader is a performative tool designed to make multichannel CV/Audio crossfade easy and comfortable. Fading from one quad CV/audio scene to another. The core of the module has...

PCB & Panels

CV Thing PCB/Panel Set

PCB034

€34.00

CV Thing is a fully mappable CV to MIDI converter in just 6HP. It's based on our VCMC module, but aiming for small and compact performance rigs. It has eight inputs that can be mapped to any MIDI message quite easily thanks to its simple and intuitive user interface. Ccs, Program change,v/oct to Note, or Clock are some of the messages that can be...

PCB & Panels

Lich PCB & Panel Set

PCB035

€40.00

PCB set and aluminum front panel for our LIch module. See module details, documentation, and B.O.M. files here.

PCB & Panels

Percall PCB & Panel Set

PCB033

€45.00

PCB set and aluminium front panel for our Percall module. See module details, documentation and B.O.M. files in here. Percall is a percussive oriented module that will shape four different sound sources into percussive sounds. Percall has four VCAs with dedicated decay envelopes and a mixer, so you can prepare a percussion submix. Added strength input...

PCB & Panels

Instrument Interface PCB & Panel Set

PCB032

€35.00

PCB set and aluminium front panel for our Instrument Interface module. See module details, documentation and B.O.M. files in here. Instrument Interface is an eurorack pre-amp capable to bring any type of audio signal to modular levels thanks to its amplification circuit. The module can drive regular and condenser microphones (+48V Phantom Powered) as...

PCB & Panels

VCMC PCB & Panel Set

PCB031

€45.00

PCB set and aluminum front panel for our VCMC module. See module details, documentation, and B.O.M. files in here. VCMC is a voltage-controlled MIDI controller. A fully editable MIDI controller with eight faders and push-buttons. Each of them with a CV or Gate input associated to automate their functioning via external signals or to be configured...

PCB & Panels

STMix PCB & Panel Set

PCB022

€27.00

PCB set and aluminum front panel for our STMix module. See module details, documentation, and B.O.M. files here. STMix is a compact 4 channel stereo mixer with an auxiliary input. This input will allow us to chain a few of them or to insert an extra fifth input. This module is compatible with our Hexmix System and can be internally connected to the...

PCB & Panels

Crush Delay v3 PCB & Panel Set

PCB006

€40.00

PCB & Panel Set of our Crush Delay v3 module. SMD parts are already presoldered. Further documentation and B.O.M here. Crush Delay v3 is a special Echo-Delay unit based on the PT2399 IC, which is able to offer 400ms of clean delay and up to 2 seconds of dirty repetitions, having a special talent to generate noisy-glitch textures. This third version...

PCB & Panels

Burst PCB & Panel Set

PCB020

€35.00

PCB set and aluminum front panel for our Burst module. See module details, documentation, and B.O.M. files here. Burst is a Pingable Trigger Burst generator with distribution, probability, and time division control. It will create multiplications of your triggers, leading to doubles, triplets, quintuplets, and true polyrhythms for your modular system....

PCB & Panels

Muxlicer PCB & Panel Set

PCB019

€32.00

PCB set and aluminium front panel for our Muxlicer module. See module details, documentation and B.O.M. files here. Muxlicer is a sequential signal processor designed to add a huge range of special functions to your modular setup in the minimum space. Is divided into three main blocks: a Digital Step Controller, a Gate Generator, and an Analog Switch...

PCB & Panels

Output V3 PCB/Panel Set

PCB021

€27.00

PCB set and aluminium front panel for our Out V3 module. See module details, documentation and B.O.M. files here. Our new Output Module is designed to be the master output for your modular system, providing an extra Cue Input to monitor any signal. FEATURES Left IN is routed to both channels when no Right signal is present. Both Outputs are TRS...

PCB & Panels

Hex Mix VCA PCB & Panel Set

PCB016

€57.00

PCB set and aluminum front panel for our HexMix VCA module. See module details, documentation, and B.O.M. files here. Hexmix VCA is a compact six channel VCA with a unique response curve range from logarithmic to linear and to exponential using a pot. All outputs are routed to output six to act as a mixer, with normalization of each one to remove each...

PCB & Panels

Kickall PCB & Panel Set

PCB023

€30.00

PCB set and aluminium front panel for our Kickall module. See module details, documentation and B.O.M. files in here. Kickall is a 6HP compact synth voice that features everything needed to make a big fat Kick sound: A stable VCO that tracks V/Oct, a couple of VCAs, envelopes for volume and pitch, and an aggressive waveshaper. The module has been...

PCB & Panels

Chopping Kinky PCB & Panel Set

PCB015

€37.00

PCB set and aluminum front panel for our Chopping Kinky module. See module details, documentation and B.O.M. files here. Chopping kinky is a voltage controllable, dual-channel wavefolder. As a unique feature, it has a chop out that will choose between both channels with a zero cross detector or an external gate. FEATURES Two unique wavefolder circuits...

PCB & Panels

VC ADSR PCB & Panel Set

PCB013

€31.12

PCB set and aluminium front panel for our VC ADSR module. See module details, documentation and B.O.M. files here. The VC ADSR is our take on the classic ADSR: now smaller, more powerful, and user friendly. FEATURES Voltage-controlled stages with manual control. Gate output on each stage of the envelope. Push-button and Gate/Trigger input Control of the...

PCB & Panels

VC Slew Limiter PCB & Panel Set

PCB012

€23.10

PCB set and aluminum front panel for our VC Slew Limiter module. See module details, documentation, and B.O.M. files here. A voltage-controlled slew limiter, AKA Lag Processor. A slew limiter is a device that smoothes an incoming signal, limiting the maximum rate of the output voltage over time. It is widely used with pitch CVs to obtain portamento and...

PCB & Panels

Spring Reverb PCB & Panel Set

PCB011

€35.00

PCB set and aluminum front panel for our Spring Reverb module. See module details, documentation, and B.O.M. files here. This is our take on an analog spring reverb module. Featuring VCAs for the two available inputs (with different routing), CV control for DRY/WET, and visual feedback for signal levels at input and output of the tank. Two CV-controlled...

PCB & Panels

Sampling Modulator PCB & Panel Set

PCB010

€35.50

PCB set and aluminum front panel for our Sampling Modulator module. See module details, documentation, and B.O.M. files here. The Sampling Modulator is a multi-function module that lies somewhere between a VCO, a Sample & Hold, and an 8 step trigger sequencer. FEATURES Sequencer Clocked Sample & Hold Analog Down-sampling Effect Sampling...

PCB & Panels

Mixer PCB & Panel Set

PCB009

€23.10

PCB set and aluminum front panel for our Mixer module. See module details, documentation, and B.O.M. files here. A four-channel mixer, suitable for audio or control signals. It features regular and inverted outputs as well as an LED level meter. Current needs: +12V: 21mA, -12V: 10mA Width: 5 HP Depth: 20mm (including power connector) Aluminum,...

PCB & Panels

Even VCO Pocochis PCB & Panel Set

PCB014

€66.07

PCB set and Pocochis front panel for our Even VCO module. All front panels from this limited edition come signed and numbered by the author. See module details, documentation and B.O.M. files here. The Even VCO is a voltage controlled oscillator which offers stability even in the case of power supply fluctuations. 10 position octave selector 1 cent...

Out of stock

PCB & Panels

Even VCO PCB & Panel Set

PCB014

€43.76

PCB set and aluminium front panel for our Even VCO module. See module details, documentation and B.O.M. files here. The Even VCO is a voltage controlled oscillator which offers stability even in the case of power supply fluctuations. 10 position octave selector 1 cent precision tracking on the whole octave range. Triangle, Ramp, Sine, PWM and Even...

View

PCB & Panels

Dual Attenuverter PCB & Panel Set

PCB007

€23.10

PCB set and aluminium front panel for our Dual Attenuverter module. See module details, documentation and B.O.M. files here. The Dual Atenuverter is a CV/Audio utility module designed to atenuate, invert and apply offset to an input signal. The “ATENUVERTER” pot will multiply your signal by 1 when turned clockwise and -1 when turned anti-clockwise. The...

PCB & Panels

BF-22 PCB & Panel Set

PCB005

€45.41

PCB set and aluminum front panel for our BF-22 module. See module details, documentation, and B.O.M. files here. The BF-22 VCF is a dual Hi/Low-pass filter inspired by the Sallen-Key filter from the early MS-20. FEATURES The module features attenuverters (inverter-attenuators) as an addition to the normal CV control for Cutoff and Resonance and offers a...

PCB & Panels

Rampage PCB & Panel Set

PCB004

€47.07

PCB set and aluminum front panel for our Rampage module. See module details, documentation, and B.O.M. files here. Rampage is Befaco’s approach to an old invention: the Serge/Buchla ramp generator. We took the idea of a “patch programmable” function generator/processor, put two units in the same module and expanded them with new functions and ways to...

PCB & Panels

Joystick PCB & Panel Set

PCB002

€26.40

PCB set and aluminum front panel for our Joystick module. See module details, documentation, and B.O.M. files here. A compact attenuverting (attenuator-inverter) joystick controller and Gate Generator. With it, you can generate and/or process two control voltages using only one hand. Provided controls for CV ranges and offset adjust the boundaries of...

PCB & Panels

A*B+C PCB & Panel Set

PCB001

€27.23

PCB set and aluminium front panel for our A*B+C module. See module details, documentation, and B.O.M. files here. A*B+C is a dual, four-quadrant multiplier with VC Offset that can act as Dual Ring Modulator, Dual VCA, and Four-Channel Mixer. FEATURES Each of the two sections of the the module is capable of performing the analog multiplication of two...