Full Kits

Showing 1-38 of 38 item(s)

Full Kits

1U STAmp DIY Kit

€57.00

ST Amp is a 1U stereo amplifier designed to boost your external signals into modular levels. The module is designed under the Intellijel 1U format and uses the same pinout, making it fully compatible with the Intelljel case’s rear connectors.

Full Kits

1U STMix DIY KIt

1UDIY022

€60.00

STMix is a four-channel stereo mixer in 28hp and 1U format. It can work independently or as an expansion of our Hexmix module via the six-pin connector located in the back. The module is designed under the Intellijel 1U format.

Full Kits

1U Out DIY Kit

1UDIY021

€55.00

Out is a 1U stereo output module designed to convert audio signals from your modular to line-levels. The module is designed to be used on cases with onboard Jack connectors or Intellijel 7U and Palette series, as it uses the same pinout. The module also includes a high-quality Headphone amplifier with an auxiliar monitoring CUE input.

Divkid

Divkid Stereo Strip - DIY kit

DKY002

€105.00

DIY version of the Divkid Stereo Strip module. Stereo Strip is a 6HP Eurorack module that builds upon the idea of a studio or mixer channel strip for a modular environment. If you’re new to the term ‘channel strip’ think of a single channel strip from a mixing desk. You’ll find amplification, EQ, panning, and level control options. Stereo Strip builds on...

Friends

Motion MTR - DIY Kit

MTK001

€100.00

DIY version of our Motion MTR module Motion MTR allows you to mix, attenuate and invert signals while having clear visual feedback of their levels. Each channel can function as: Audio level control with VU meter CV attenuator with voltage meter CV inverter with voltage meter Each input is connected to 10V, so you can use each of them to generate...

Divkid

Divkid Mutes - DIY Kit

DKY001

€80.00

DIY kit of the Divkid Mutes module. Mutes goes above and beyond basic muting by allowing you to split groups of signals to multiple destinations, making it great for FX dub performing and varied signal routing. Vactrols on the circuit gives to the switching a pleasing decay for both audio and modulation as well a totally click free muting. Three-position...

Full Kits

Pony VCO DIY Kit

DIY040

€150.00

DIY Version of our Pony VCO module. This is a pre-soldered DIY Kit. Pony VCO is a fully analog Thru-Zero oscillator with wavefolder and dedicated VCA in only 4HP. The module offers great stability and tuning capabilities thanks to its powerful core, based onSound Semiconductors IC. It comes with range selector, that allows it to go down to LFO range, as...

Out of stock

Full Kits

ACDC DIY Kit

DIY039

€175.00

DIY version of our ACDC Eurorack module AC/DC is a class-compliant DC coupled audio interface in Eurorack format. With its 6 HP, it is perfect for live performance and travel Rigs.Based on Rebel Technology OWL platform, It allows sending and receiving both CV and Audio at 16 bits 48 kHz. as well as load patches from Rebel’s library.It is compatible with...

View

Full Kits

Noise Plethora DIY Kit

DIY037

€210.00

DIY version of Noise Plethora Module. Noise Plethora is a multitimbral noise monster in 14HP.The module consists of three digital sound generators, followed by three analog multimode Filters. This combination makes it easy to sculpt different textures and noises and play with them intuitively and musically.The first two channels let you choose from...

Full Kits

MEX DIY Kit

DIY038

€52.00

DIY version of our Mex module. MEX, is a gate expander for Muxlicer! It adds a new line of gates to Muxlicer’s sequence, where you can choose to turn off the step, output the same number of gates as muxlicer, or send just one. A very simple concept, that provides great flexibility! And the greatest thing: you can daisy chain them so you can add as many as...

Presoldered KIts

Morphader DIY Kit

DIY036

€145.00

DIY version of our Morphader module. This is a pre-soldered kit. All the SMT components are already soldered on the board. Assembly Manual and documentation. Morphader is a performative tool designed to make multichannel CV/Audio crossfade easy and comfortable. Fading from one quad CV/audio scene to another. The core of the module has four CV-controlled...

Full Kits

Lich DIY Kit

DIY035

€175.00

DIY version of our Lich Module. Knurlies included. Lich is a programmable multi-function module based on Rebel Technology OWL platform. This is a Befaco Rebel collaboration that brings back Owl’s platform with this new hardware iteration. It has stereo in and out, four pot controls summed to cv inputs (like the classic Owl module) And as addition, CV and...

Full Kits

CV Thing DIY Kit

DIY034

€160.00

DIY version of our CV Thing Module. CV Thing is a fully mappable CV to MIDI converter in just 6HP. Its based on our VCMC module, but aiming for small and compact performance rigs. It has eight inputs that can be mapped to any MIDI message quite easily thanks to its simple and intuitive user interface. CCs, Program change ,V/Oct to Note or Clock are some...

Full Kits

Burst DIY Kit

DIY020

€110.00

DIY kit version of our Burst Eurorack module. The kit includes all the necessary parts to make a completed module including power cable and four of our bespoke Knurlies M3 rack screws. Burst is a Pingable Trigger Burst generator with distribution, probability, and time division control. It will create multiplications of your triggers, leading to...

Full Kits

VC Slew Limiter DIY Kit

DIY012

€55.00

DIY kit version of our VC Slew Limiter Eurorack module. The kit includes all the necessary parts to make a completed module including power cable and four of our bespoke Knurlies M3 rack screws. A voltage-controlled slew limiter, AKA Lag Processor. A slew limiter is a device that smoothes an incoming signal, limiting the maximum rate of the output...

Full Kits

Sampling Modulator DIY Kit

DIY010

€110.00

DIY kit version of our Sampling Modulator Eurorack module. The kit includes all the necessary parts to make a completed module including power cable and two of our bespoke Knurlies M3 rack screws. The Sampling Modulator is a multi-function module that lies somewhere between a VCO, a Sample & Hold, and an 8 step trigger sequencer. FEATURES Sequencer...

Full Kits

Spring Reverb DIY Kit

DIY011

€145.00

DIY kit version of our Spring Reverb Eurorack module. The kit includes all the necessary parts to make a completed module including power cable and four of our bespoke Knurlies M3 rack screws. REVERB TANK INCLUDED This is our take on an analog spring reverb module. Featuring VCAs for the two available inputs (with different routing), CV control for...

Full Kits

Dual Attenuverter DIY Kit

DIY007

€55.00

DIY kit version of our Dual Attenuverter Eurorack module. The kit includes all the necessary parts to make a completed module including power cable and two of our bespoke Knurlies M3 rack screws. The Dual Atenuverter is a CV/Audio utility module designed to atenuate, invert and apply offset to an input signal. The “ATENUVERTER” pot will multiply your...

Full Kits

Chopping Kinky DIY Kit

DIY015

€110.00

DIY kit version of our Chopping Kinky Eurorack module. The kit includes all the necessary parts to make a completed module including a power cable and two of our bespoke Knurlies M3 rack screws. Chopping kinky is a voltage controllable, dual-channel wavefolder. As a unique feature, it has a chop out that will choose between both channels with a zero...

Full Kits

Even VCO DIY Kit

DIY014

€125.00

DIY kit version of our EvenVCO Eurorack module. The kit includes all the necessary parts to make a completed module including power cable and four of our bespok Knurlies M3 rack screws. The Even VCO is a voltage controlled oscillator which offers stability even in the case of power supply fluctuations. 10 position octave selector 1 cent precision...

Full Kits

VCMC DIY Kit

DIY031

€190.00

DIY version of our VCMC Module. VCMC is a voltage-controlled MIDI controller. A fully editable MIDI controller with eight faders and push-buttons. Each of them with a CV or Gate input associated to automate their functioning via external signals or to be configured independently for further control. Each control on VCMC can be edited on its OLED screen...

Full Kits

Mixer DIY Kit

DIY009

€55.00

DIY kit version of our Mixer Eurorack module. The kit includes all the necessary parts to make a completed module including power cable and four of our bespoke Knurlies M3 rack screws. A four-channel mixer, suitable for audio or control signals. It features regular and inverted outputs as well as an LED level meter. Current needs: +12V: 21mA, -12V:...

Full Kits

Rampage DIY Kit

DIY004

€160.00

DIY kit version of our Rampage Eurorack module. The kit includes all the necessary parts to make a completed module including a power cable and four of our bespoke Knurlies M3 rack screws. Rampage is Befaco’s approach to an old invention: the Serge/Buchla ramp generator. We took the idea of a “patch programmable” function generator/processor, put two...

Full Kits

Kickall DIY Kit

DIY023

€115.70

DIY kit version of our Kickall Eurorack module. The kit includes all the necessary parts to make a completed module including PCB, components, aluminium front panel, power cable and a set of our bespoke Knurlies M3 rack screws. Kickall is a 6HP compact synth voice that features everything needed to make a big fat Kick sound: A stable VCO that tracks...

Full Kits

BF-22 VCF DIY Kit

DIY005

€130.00

DIY kit version of our BF-22 VCF Eurorack module. The kit includes all the necessary parts to make a completed module including a power cable and four of our bespoke Knurlies M3 rack screws. The BF-22 VCF is a dual Hi/Low-pass filter inspired by the Sallen-Key filter from the early MS-20. FEATURES The module features attenuverters...

Full Kits

Percall DIY Kit

DIY033

€155.00

DIY kit version of our Percall Eurorack module. The kit includes all the necessary parts to make a completed module including power cable, four of our bespoke Knurlies M3 rack screws and Bananuts! Percall is a percussive oriented module that will shape four different sound sources into percussive sounds. Percall has four VCAs with dedicated decay...

Full Kits

VC ADSR DIY Kit

DIY013

€105.00

DIY kit version of our VC ADSR Eurorack module. The kit includes all the necessary parts to make a completed module including a power cable and four of our bespoke Knurlies M3 rack screws. Assembled Version of our VC ADSR module. Knurlies included, The VC ADSR is our take on the classic ADSR: now smaller, more powerful, and user friendly. FEATURES...

Full Kits

A*B+C DIY Kit

DIY001

€95.00

DIY kit version of our A*B+C Eurorack module. The kit includes all the necessary parts to make a completed module including power cable and our bespoke Knurlies M3 rack screws. A*B+C is a dual, four-quadrant multiplier with VC Offset that can act as Dual Ring Modulator, Dual VCA, and Four-Channel Mixer. FEATURES Each of the two sections of the module...

Full Kits

Output V3 DIY Kit

DIY021

€72.00

DIY kit version of our new Output V3 Eurorack module. The kit includes all the necessary parts to make a completed module including a power cable and four of our bespoke Knurlies M3 rack screws. Our new Output Module is designed to be the master output for your modular system, providing an extra Cue Input to monitor any signal. FEATURES Left IN is...

Full Kits

Hex Mix VCA DIY Kit

DIY016

€170.00

DIY kit version of our Hex Mix VCA Eurorack module. The kit includes all the necessary parts to make a completed module including power cable and four of our bespoke Knurlies M3 rack screws. Hexmix VCA is a compact six channel VCA with a unique response curve range from logarithmic to linear and to exponential using a pot. All outputs are routed to...

Full Kits

STMix DIY Kit

DIY022

€70.00

DIY kit version of our STMix Eurorack module. The kit includes all the necessary parts to make a completed module including PCB, components, aluminium front panel, power cable and a set of our bespoke Knurlies M3 rack screws. STMix is a compact 4 channel stereo mixer with an auxiliary input. This input will allow us to chain a few of them or to insert...

Full Kits

Joystick DIY Kit

DIY002

€97.48

DIY kit version of our Joystick Eurorack module. The kit includes all the necessary parts to make a completed module including power cable and our bespoke Knurlies M3 rack screws. A compact attenuverting (attenuator-inverter) joystick controller and Gate Generator. With it, you can generate and/or process two control voltages using only one hand....

Full Kits

InAmp DIY Kit

DIY024

€70.00

DIY kit version of our InAmp Eurorack module. The kit includes all the necessary parts to make a completed module including power cable and our bespoke Knurlies M3 rack screws. Inamp is a dual pre-amp in just 4 HPs. Featuring 6,3 Jacks inputs as well as Minijacks. Both inputs are summed so you can use them at the same time as an input mixer. The unit is...

Full Kits

Crush Delay v3 DIY Kit

DIY006

€130.00

DIY kit version of our Crush Delay v3 Eurorack module. The kit includes all the necessary parts to make a completed module including PCB, components, aluminum front panel, power cable, and a set of our bespoke Knurlies M3 rack screws. Crush Delay v3 is a special Echo-Delay unit based on the PT2399 IC, which is able to offer 400ms of clean delay and up...

Full Kits

Hexpander DIY Kit

DIY018

€235.00

DIY kit version of our Hexpander Eurorack module. The kit includes all the necessary parts to make a completed module including power cable, Hexmix VCA connector cable and four of our bespoke Knurlies M3 rack screws. Hexpander adds great functionality to Hexmix module. Featuring Three aux send with stereo returns, individual outputs for each channel,...

Full Kits

Hexmix DIY Kit

DIY017

€275.00

DIY kit version of our Hexmix Eurorack module. The kit includes all the necessary parts to make a completed module including power cable and four of our bespoke Knurlies M3 rack screws. Hexmix System is a six channel performance mixer specially designed for Eurorack. The system has two separate modules, the core of the mixer: Hexmix that has six...

Full Kits

Instrument Interface DIY Kit

DIY032

€135.00

DIY Version of our Instrument Interface Module. Instrument Interface is an eurorack pre-amp capable to bring any type of audio signal to modular levels thanks to its amplification circuit. The module can drive regular and condenser microphones (+48V Phantom Powered) as well as Instrument and Line signals with a very low distortion ratio. Instrument...

Full Kits

Muxlicer DIY Kit

DIY019

€132.23

DIY kit version of our Muxlicer Eurorack module. The kit includes all the necessary parts to make a completed module including power cable and four of our bespoke Knurlies M3 rack screws. Muxlicer is a sequential signal processor designed to add a huge range of special functions to your modular setup in the minimum space. Is divided into three main...