Partial Kits

Showing 1-23 of 23 item(s)

Out of stock

PCB & Panels

Pony VCO 1U Mod Kit

€10.00

Front Panel Kit with the instructions to turn your Pony VCO 3U into a 1U module. Pony VCO is a fully analog Thru-Zero oscillator with wave-folder and dedicated VCA in only 4HP. The module offers great stability and tuning capabilities thanks to its powerful core, based onSound Semiconductors IC. It comes with a range selector, that allows it to go down...

View

Partial Kits

Percall Partial Kit

PTDIY033

€86.00

CAREFUL! THIS IS NOT A FULL KIT The partial kit of our Percall module. Includes PCB/Panel Set + Rare parts. Percall is a percussive-oriented module that will shape four different sound sources into percussive sounds. Percall has four VCAs with dedicated decay envelopes and a mixer, so you can prepare a percussion submix. Added strength input will provide...

Partial Kits

VCMC Partial Kit

PTDIY031

€95.00

CAREFUL! THIS IS NOT A FULL KIT The partial kit of our VCMC module. Includes PCB/Panel Set + Rare parts. VCMC is a voltage-controlled MIDI controller. A fully editable MIDI controller with eight faders and push buttons. Each of them with a CV or Gate input associated to automate their functioning via external signals or to be configured independently for...

Partial Kits

STMix Partial Kit

PTDIY022

€45.00

CAREFUL! THIS IS NOT A FULL KIT The partial kit of our STMix module. Includes PCB/Panel Set + Rare parts. STMix is a compact 4 channel stereo mixer with an auxiliary input. This input will allow us to chain a few of them or to insert an extra fifth input. This module is compatible with our Hexmix System and can be internally connected to the Hexmix module...

Partial Kits

Spring Reverb Partial Kit

PTDIY011

€48.00

CAREFUL! THIS IS NOT A FULL KIT The partial kit of our Spring Reverb module. Includes PCB/Panel Set + Rare parts. This is our take on an analog spring reverb module. Featuring VCAs for the two available inputs (with different routing), CV control for DRY/WET and visual feedback for signal levels at input and output of the tank. Two CV-controlled audio...

Partial Kits

VC Slew Limiter Partial Kit

PTDIY012

€34.00

CAREFUL! THIS IS NOT A FULL KIT The partial kit of our VC Slew Limiter module. Includes PCB/Panel Set + Rare parts. A voltage-controlled slew limiter, AKA Lag Processor. A slew limiter is a device that smoothes an incoming signal, limiting the maximum rate of the output voltage over time. It is widely used with pitch CVs to obtain portamento and CV...

Partial Kits

Output Partial Kit

PTDIY021

€38.00

CAREFUL! THIS IS NOT A FULL KIT The partial kit of our Output module. Includes PCB/Panel Set + Rare parts. Our new Output Module is designed to be the master output for your modular system, providing an extra Cue Input to monitor any signal. FEATURES Left IN is routed to both channels when no Right signal is present. Both Outputs are TRS balanced. A...

Partial Kits

Muxlicer Partial Kit

PTDIY019

€75.00

CAREFUL! THIS IS NOT A FULL KIT The partial kit of our Muxlicer module. Includes PCB/Panel Set + Rare parts. Muxlicer is a sequential signal processor designed to add a huge range of special functions to your modular setup in the minimum space. Is divided into three main blocks: a Digital Step Controller, a Gate Generator, and an Analog Switch (a.k.a....

Partial Kits

Mixer Partial Kit

PTDIY009

€36.00

CAREFUL! THIS IS NOT A FULL KIT The partial kit of our Mixer module. Includes PCB/Panel Set + Rare parts. A four-channel mixer, suitable for audio or control signals. It features regular and inverted outputs as well as an LED level meter. Current needs: +12V: 21mA, -12V: 10mA Width: 5 HP Depth: 20mm (including power connector) Aluminum, heat-treated...

Partial Kits

Kickall Partial Kit

PTDIY023

€45.00

CAREFUL! THIS IS NOT A FULL KIT The partial kit of our Kickall module. Includes PCB/Panel Set + Rare parts. Kickall is a 6HP compact synth voice that features everything needed to make a big fat Kick sound: A stable VCO that tracks V/Oct, a couple of VCAs, envelopes for volume and pitch, and an aggressive waveshaper. The module has been designed with a...

Partial Kits

Instrument Interface Partial Kit

PTDIY032

€54.00

CAREFUL! THIS IS NOT A FULL KIT The partial kit of our Instrument Interface module. Includes PCB/Panel Set + Rare parts. Instrument Interface is an eurorack pre-amp capable to bring any type of audio signal to modular levels thanks to its amplification circuit. The module can drive regular and condenser microphones (+48V Phantom Powered) as well as...

Partial Kits

Dual Attenuverter Partial Kit

PTDIY007

€35.00

CAREFUL! THIS IS NOT A FULL KIT The partial kit of our Dual Attenuverter module. Includes PCB/Panel Set + Rare parts. The Dual Atenuverter is a CV/Audio utility module designed to attenuate, invert and apply offset to an input signal. The “ATENUVERTER” pot will multiply your signal by 1 when turned clockwise and -1 when turned anti-clockwise. The...

Partial Kits

Burst Partial Kit

PTDIY020

€57.00

CAREFUL! THIS IS NOT A FULL KIT The partial kit of our Burst module. Includes PCB/Panel Set + Rare parts. Burst is a Pingable Trigger Burst generator with distribution, probability, and time division control. It will create multiplications of your triggers, leading to doubles, triplets, quintuplets, and true polyrhythms for your modular system. FEATURES...

Partial Kits

BF-22 Partial Kit

PTDIY005

€75.00

CAREFUL! THIS IS NOT A FULL KIT The partial kit of our BF-22 module. Includes PCB/Panel Set + Rare parts. The BF-22 VCF is a dual Hi/Low-pass filter inspired by the Sallen-Key filter from the early MS-20. FEATURES The module features attenuverters (inverter-attenuators) as an addition to the normal CV control for Cutoff and Resonance and offers a little...

Partial Kits

VC ADSR Partial Kit

PTDIY013

€51.00

CAREFUL! THIS IS NOT A FULL KIT The partial kit of our VC ADSR module. Includes PCB/Panel Set + Rare parts. The VC ADSR is our take on the classic ADSR: now smaller, more powerful, and user friendly. FEATURES Voltage-controlled stages with manual control. Gate output on each stage of the envelope. Push-button and Gate/Trigger input Control of the...

Partial Kits

A*B+C Partial Kit

PTDIY001

€45.00

CAREFUL! THIS IS NOT A FULL KIT The partial kit of our A*B+C module. Includes PCB/Panel Set + Rare parts. A*B+C is a dual, four-quadrant multiplier with VC Offset that can act as Dual Ring Modulator, Dual VCA, and Four-Channel Mixer. FEATURES Each of the two sections of the module is capable of performing the analog multiplication of two signals (A and B)...

Partial Kits

Crush Delay Partial Kit

PTDIY006

€67.00

CAREFUL! THIS IS NOT A FULL KIT The partial kit of our Crush Delay module. Includes PCB/Panel Set + Rare parts. For the complete BOM and more information please refer to our website. Crush Delay v3 is a special Echo-Delay unit based on the PT2399 IC, which is able to offer 400ms of clean delay and up to 2 seconds of dirty repetitions, having a special...

Partial Kits

Chopping Kinky Partial Kit

PTDIY015

€53.00

CAREFUL! THIS IS NOT A FULL KIT Partial kit of our Chopping Kinky module. Includes PCB/Panel Set + Rare parts. For the complete BOM and more information please refer to our website. Chopping kinky is a voltage controllable, dual-channel wavefolder. As a unique feature, it has a chop out that will choose between both channels with a zero cross detector or...

Partial Kits

Sampling Modulator Partial Kit

PTDIY010

€64.00

CAREFUL! THIS IS NOT A FULL KIT The partial kit of our Sampling Modulator module includes PCB/Panel Set + Rare parts. The Sampling Modulator is a multi-function module that lies somewhere between a VCO, a Sample & Hold, and an 8 step trigger sequencer. FEATURES Sequencer Clocked Sample & Hold Analog Down-sampling Effect Sampling Modulator/Shaper...

Partial Kits

Joystick Partial Kit

PTDIY002

€57.00

CAREFUL! THIS IS NOT A FULL KIT Partial kit of our Joystick module. Includes PCB/Panel Set + Rare parts. A compact attenuverting (attenuator-inverter) joystick controller and Gate Generator. With it, you can generate and/or process two control voltages using only one hand. Provided controls for CV ranges and offset adjust the boundaries of your control,...

Partial Kits

Even VCO Partial Kit

PTDIY014

€59.00

CAREFUL! THIS IS NOT A FULL KIT Partial kit of our Even VCO module. Includes PCB/Panel Set + Rare parts. For the complete BOM and more information please refer to the website. The Even VCO is a voltage controlled oscillator which offers stability even in the case of power supply fluctuations. 10 position octave selector 1 cent precision tracking on the...

Partial Kits

Rampage Partial Kit

PTDIY004

€90.00

CAREFUL! THIS IS NOT A FULL KIT The partial kit of our Rampage module. Includes PCB/Panel Set + Rare parts. Rampage is Befaco’s approach to an old invention: the Serge/Buchla ramp generator. We took the idea of a “patch programmable” function generator/processor, put two units in the same module and expanded them with new functions and ways to combine...

Partial Kits

Hexmix VCA Partial Kit

PTDIY016

€95.00

CAREFUL! THIS IS NOT A FULL KIT The partial kit of our Hexmix VCA module. Includes PCB/Panel Set + Rare parts. For the complete BOM and more information please refer to our website Hexmix VCA is a compact six channel VCA with a unique response curve range from logarithmic to linear and to exponential using a pot. All outputs are routed to output six to...