Assembled Modules

Showing 1-43 of 43 item(s)

Assembled Modules

FXBoy Assembled Module

€380.00

Fx Boy is a multi-FX module designed in collaboration with several talented manufacturers. CV controllable four-band EQ, routable post or pre-effect. Selector for two different flavours of each cart. Open specifications to design your own carts Hot swap for all carts. (A tiny pop can occur depending on the cartridge design)

Assembled Modules

1U TRS - Assembled Module

1U043

€40.00

Total flexibility for the Befaco 7U or Intellijel cases rear connectors Jacks. The channels are reversible and can be used independently for Input or Output. 4 Inputs or Outputs (per module) can be obtained by “Y” cables. Independent tip and ring attenuators are selectable for each channel to convert the Modular Input Level to Line Output Level. You can...

Friends

1U Motion MTR - Assembled Module

1UMT001

€135.00

Version 1U of our Motion MTR Motion MTR allows you to mix, attenuate and invert signals while having clear visual feedback of their levels. Each channel can function as: Audio level control with VU meter CV attenuator with voltage meter CV inverter with voltage meter Each input is connected to 10V, so you can use each of them to generate fixed...

Assembled Modules

1U STAmp Assembled Module

1U042

€75.00

ST Amp is a 1U stereo amplifier designed to boost your external signals into modular levels. The module is designed under the Intellijel 1U format and uses the same pinout, making it fully compatible with the Intelljel case’s rear connectors.

Assembled Modules

1U STMix Assembled Module

1U022

€90.00

STMix is a four-channel stereo mixer in 28hp and 1U format. It can work independently or as an expansion of our Hexmix module via the six-pin connector located in the back. The module is designed under the Intellijel 1U format.

Out of stock

Assembled Modules

1U Out Assembled Module

1U021

€85.00

Out is a 1U stereo output module designed to convert audio signals from your modular to line-levels. The module is designed to be used on cases with onboard Jack connectors or Intellijel 7U and Palette series, as it uses the same pinout. The module also includes a high-quality Headphone amplifier with an auxiliar monitoring CUE input.

View

Friends

Motion MTR - Assembled Module

MT001

€125.00

Motion MTR allows you to mix, attenuate and invert signals while having clear visual feedback of their levels. Each channel can function as: Audio level control with VU meter CV attenuator with voltage meter CV inverter with voltage meter Each input is connected to 10V, so you can use each of them to generate fixed voltages. Also, the outputs of...

Divkid

Divkid Mutes - Assembled Module

DK001

€95.00

Mutes goes above and beyond basic muting by allowing you to split groups of signals to multiple destinations, making it great for FX dub performing and varied signal routing. Vactrols on the circuit gives to the switching a pleasing decay for both audio and modulation as well a totally click free muting. Three-position switch: MOMENTARY signal...

Divkid

Divkid Stereo Strip - Assembled Module

DK002

€185.00

Stereo Strip is a 6HP Eurorack module that builds upon the idea of a studio or mixer channel strip for a modular environment. If you’re new to the term ‘channel strip’ think of a single channel strip from a mixing desk. You’ll find amplification, EQ, panning, and level control options. Stereo Strip builds on those ideas by adding voltage control for...

Assembled Modules

Pony VCO Assembled Module 1U

1U040

€200.00

Assembled version of our Pony VCO module in 1U format. Pony VCO is a fully analog Thru-Zero oscillator with wavefolder and dedicated VCA in only 4HP. The module offers great stability and tuning capabilities thanks to its powerful core, based onSound Semiconductors 2130 IC. It comes with a range selector, that allows it to go down to LFO range, as well as...

Assembled Modules

Pony VCO Assembled Module 3U

BF040

€200.00

Assembled version of our Pony VCO module in 3U format. Pony VCO is a fully analog Thru-Zero oscillator with wavefolder and dedicated VCA in only 4HP. The module offers great stability and tuning capabilities thanks to its powerful core, based onSound Semiconductors 2130 IC. It comes with a range selector, that allows it to go down to LFO range, as well as...

Assembled Modules

ACDC Assembled Module

BF039

€300.00

Assembled version of ACDC Eurorack module. AC/DC is a class-compliant DC coupled audio interface in Eurorack format. With its 6 HP, it is perfect for live performance and travel Rigs.Based on Rebel Technology OWL platform, It allows sending and receiving both CV and Audio at 16 bits 48 kHz. as well as load patches from Rebel’s library.It is compatible...

Assembled Modules

Noise Plethora Assembled Module

BF037

€290.00

Assembled version of Noise Plethora Module. Noise Plethora is a multitimbral noise monster in 14HP.The module consists of three digital sound generators, followed by three analog multimode Filters. This combination makes it easy to sculpt different textures and noises and play with them intuitively and musically.The first two channels let you choose from...

Assembled Modules

MEX Assembled Module

BF038

€70.00

Assembled version of our Mex module. MEX, is a gate expander for Muxlicer! It adds a new line of gates to Muxlicer’s sequence, where you can choose to turn off the step, output the same number of gates as muxlicer, or send just one. A very simple concept, that provides great flexibility! And the greatest thing: you can daisy chain them so you can add as...

Assembled Modules

Morphader Assembled Module

BF036

€205.00

Assembled version of our Morphader module. Morphader is a performative tool designed to make multichannel CV/Audio crossfade easy and comfortable. Fading from one quad CV/audio scene to another. The core of the module has four CV-controlled crossfaders, each with their individual control and a master fader to control them all. The module mixes the four...

Assembled Modules

Lich Assembled Module

BF035

€300.00

Assembled version of our Lich module. Knurlies included. Lich is a programmable multi-function module based in Rebel Technology OWL platform. This is a Befaco Rebel collaboration that brings back Owl’s platform with this new hardware iteration. It has stereo in and out, four pot controls summed to cv inputs (like the classic Owl module) And as addition,...

Assembled Modules

CV Thing Assembled Module

BF034

€240.00

Assembled version of our CV Thing module. Knurlies included! Cv thing is a fully mappable CV to MIDI converter in just 6HP. Its based on our VCMC module, but aiming for small and compact performance rigs. It has eight inputs that can be mapped to any MIDI message quite easily thanks to its simple and intuitive user interface. Ccs, Program change,v/oct to...

Assembled Modules

Percall Assembled Module

BF033

€230.00

Assembled Version of our Percall module, ready to mount in your rack. Percall is a percussive oriented module that will shape four different sound sources into percussive sounds. Percall has four VCAs with dedicated decay envelopes and a mixer, so you can prepare a percussion submix. Added strength input will provide extra dynamics to the sounds! To round...

Assembled Modules

Instrument Interface Assembled Module

BF032

€205.00

Assembled version of our Instrument Interface module. Knurlies included! Instrument Interface is an eurorack pre-amp capable to bring any type of audio signal to modular levels thanks to its amplification circuit. The module can drive regular and condenser microphones (+48V Phantom Powered) as well as Instrument and Line signals with a very low distortion...

Assembled Modules

VCMC Assembled Module

BF031

€300.00

Assembled version of our VCMC module. Knurlies included! VCMC is a voltage-controlled MIDI controller. A fully editable MIDI controller with eight faders and push-buttons. Each of them with a CV or Gate input associated to automate their functioning via external signals or to be configured independently for further control. Each control on VCMC can be...

Assembled Modules

Kickall Assembled Module

BF023

€200.00

Assembled Version of our Kickall module, ready to mount in your rack. Kickall is a 6HP compact synth voice that features everything needed to make a big fat Kick sound: A stable VCO that tracks V/Oct, a couple of VCAs, envelopes for volume and pitch, and an aggressive waveshaper. The module has been designed with a kick synthesis patch in mind: VCO to VCA...

Assembled Modules

STMix Assembled Module

BF022

€125.00

Assembled Version of our STMix module, ready to mount in your rack. STMix is a compact 4 channel stereo mixer with an auxiliary input. This input will allow us to chain a few of them or to insert an extra fifth input. This module is compatible with our Hexmix System and can be internally connected to the Hexmix module to add the output of STMix to your...

Assembled Modules

Crush Delay v3 Assembled Module

BF006

€220.00

Assembled Version of our Crush Delay v3 module, ready to mount in your rack. Crush Delay v3 is a special Echo-Delay unit based on the PT2399 IC, which is able to offer 400ms of clean delay and up to 2 seconds of dirty repetitions, having a special talent to generate noisy-glitch textures. This third version comes with some interesting new features like...

Assembled Modules

Burst Assembled Module

BF020

€160.00

Assembled Version of our Burst module, ready to mount in your rack. Burst is a Pingable Trigger Burst generator with distribution, probability, and time division control. It will create multiplications of your triggers, leading to doubles, triplets, quintuplets, and true polyrhythms for your modular system. FEATURES Custom trigger bursts up to 64...

Assembled Modules

Muxlicer Assembled Module

BF019

€200.00

Assembled Version of our Muxlicer module, ready to mount in your rack. Muxlicer is a sequential signal processor designed to add a huge range of special functions to your modular setup in the minimum space. Is divided into three main blocks: a Digital Step Controller, a Gate Generator, and an Analog Switch (a.k.a. Mux/DeMux) The module is designed with a...

Assembled Modules

Output V3 Assembled Module

BF021

€125.00

Assembled Version of our new Output module, ready to mount in your rack. Our new Output Module is designed to be the master output for your modular system, providing an extra Cue Input to monitor any signal. FEATURES Left IN is routed to both channels when no Right signal is present. Both Outputs are TRS balanced. A Headphones out is available. You can...

Out of stock

Assembled Modules

Hexpander Assembled Module

BF018

€300.00

Assembled Version of our Hexpander module, ready to mount in your rack. Hexpander adds great functionality to Hexmix module. Featuring Three aux send with stereo returns, individual outputs for each channel, complete PFL system and balanced output. Hexpander is designed to be placed on top of Hexmix. Expanding Eurorack concept to 6U, allows every channel...

View

Assembled Modules

Hexmix Assembled Module

BF017

€400.00

Assembled Version of our Hexmix module, ready to mount in your rack. Hexmix System is a six channel performance mixer specially designed for Eurorack. The system has two separate modules, the core of the mixer: Hexmix that has six channels with three band EQ, mute, pan and EQ section on the master, and Hexpander that add three auxiliar sends per channel,...

Assembled Modules

InAmp Assembled Module

BF024

€125.00

Assembled Version of our dual-channel InAmp, ready to mount in your rack. Inamp is a dual pre-amp in just 4 HPs. Featuring 6,3 Jacks inputs as well as Minijacks. Both inputs are summed so you can use them at the same time as an input mixer. The unit is designed to amplify up to x20 the input signal, allowing to amplify most of the music machines out there...

Assembled Modules

Hex Mix VCA Assembled Module

BF016

€265.00

Assembled Version of our Hex Mix VCA module, ready to mount in your rack. Hexmix VCA is a compact six channel VCA with a unique response curve range from logarithmic to linear and to exponential using a pot. All outputs are routed to output six to act as a mixer, with normalization of each one to remove each channel from the Mix. FEATURES Hexmix VCA can...

Assembled Modules

Chopping Kinky Assembled Module

BF015

€190.00

Assembled Version of our Dual-wavefolder Chopping Kinky, ready to mount in your rack. Chopping kinky is a voltage controllable, dual-channel wavefolder. As a unique feature, it has a chop out that will choose between both channels with a zero cross detector or an external gate. FEATURES Two unique wavefolder circuits Two CV inputs per channel, one with...

Out of stock

Assembled Modules

Even VCO Pocochis edition (Assembled)

BF014

€235.00

Assembled Version of our Even VCO module, with Pocochis limited edition front panel.The Even VCO is a voltage controlled oscillator which offers stability even in the case of power supply fluctuations. 10 position octave selector 1 cent precision tracking on the whole octave range. Triangle, Ramp, Sine, PWM and Even outputs. Hard Sync input Two V/Oct...

View

Assembled Modules

VC ADSR Assembled Module

BF013

€160.00

Assembled Version of our VC ADSR module. Knurlies included, The VC ADSR is our take on the classic ADSR: now smaller, more powerful, and user friendly. FEATURES Voltage-controlled stages with manual control. Gate output on each stage of the envelope. Push-button and Gate/Trigger input Control of the response curve between each stage of the envelope...

Assembled Modules

VC Slew Limiter Assembled Module

BF012

€100.00

Assembled Version of our Slew Limiter module, ready to mount in your rack. A voltage-controlled slew limiter, AKA Lag Processor. A slew limiter is a device that smoothes an incoming signal, limiting the maximum rate of the output voltage over time. It is widely used with pitch CVs to obtain portamento and CV slides, but is also very useful for converting...

Assembled Modules

Spring Reverb Assembled Module

BF011

€210.00

Assembled Version of our Spring Reverb module, ready to mount in your rack. Note: Reverb Tank Included! This is our take on an analog spring reverb module. Featuring VCAs for the two available inputs (with different routing), CV control for DRY/WET and visual feedback for signal levels at input and output of the tank. Two CV-controlled audio inputs. In 1...

Assembled Modules

Sampling Modulator Assembled Module

BF010

€200.00

Assembled Version of our Sampling Modulator module, ready to mount in your rack. The Sampling Modulator is a multi-function module that lies somewhere between a VCO, a Sample & Hold, and an 8 step trigger sequencer. FEATURES Sequencer Clocked Sample & Hold Analog Down-sampling Effect Sampling Modulator/Shaper 8 Step Trigger Sequencer Unusual...

Assembled Modules

Mixer Assembled Module

BF009

€90.00

Assembled Version of our Mixer module, ready to mount in your rack. A four-channel mixer, suitable for audio or control signals. It features regular and inverted outputs as well as an LED level meter. Current needs: +12V: 21mA, -12V: 10mA Width: 5 HP Depth: 20mm (including power connector) Aluminiun, heat-treated front panel.

Assembled Modules

Even VCO Assembled Module

BF014

€200.00

Assembled Version of our Even VCO module, ready to mount in your rack. The Even VCO is a voltage controlled oscillator which offers stability even in the case of power supply fluctuations. 10 position octave selector 1 cent precision tracking on the whole octave range. Triangle, Ramp, Sine, PWM and Even outputs. Hard Sync input Two V/Oct inputs Linear FM...

Assembled Modules

Dual Attenuverter Assembled Module

BF007

€90.00

Assembled Version of our Dual Atenuverter module, ready to mount in your rack. The Dual Atenuverter is a CV/Audio utility module designed to atenuate, invert and apply offset to an input signal. The “ATENUVERTER” pot will multiply your signal by 1 when turned clockwise and -1 when turned anti-clockwise. The “OFFSET” control can add +/- 10V DC to the...

Assembled Modules

BF-22 VCF Assembled Module

BF005

€210.00

Assembled Version of our BF-22 module, ready to mount in your rack. The BF-22 VCF is a dual Hi/Low-pass filter inspired by the Sallen-Key filter from the early MS-20. FEATURES The module features attenuverters (inverter-attenuators) as an addition to the normal CV control for Cutoff and Resonance, and offers a little more presence in the Resonance than...

Assembled Modules

Rampage Assembled Module

BF004

€265.00

Assembled Version of our Rampage module, ready to mount in your rack. Rampage is Befaco’s approach to an old invention: the Serge/Buchla ramp generator. We took the idea of a “patch programmable” function generator/processor, put two units in the same module and expanded them with new functions and ways to combine them: Slope detectors, analog logic...

Assembled Modules

Joystick Assembled Module

BF002

€150.00

Assembled Version of our Joystick module, ready to mount in your rack. A compact attenuverting (attenuator-inverter) joystick controller and Gate Generator. With it, you can generate and/or process two control voltages using only one hand. Provided controls for CV ranges and offset adjust the boundaries of your control, this way it never gets out of the...

Assembled Modules

A*B+C Assembled Module

BF001

€130.00

Assembled version of our A*B+C module. Knurlies included. A*B+C is a dual, four-quadrant multiplier with VC Offset that can act as Dual Ring Modulator, Dual VCA, and Four-Channel Mixer. FEATURES Each of the two sections of the module is capable of performing the analog multiplication of two signals (A and B) and add an offset (C). It can also act as a...