Befaco - Shop

Assembled Modules

1U STAmp Assembled Module

€76.00

ST Amp is a 1U stereo amplifier designed to boost your external signals into modular levels. The module is designed under the Intellijel 1U format and uses the same pinout, making it fully compatible with the Intelljel case’s rear connectors.

Assembled Modules

1U STMix Assembled Module

1U022

€92.00

STMix is a four-channel stereo mixer in 28hp and 1U format. It can work independently or as an expansion of our Hexmix module via the six-pin connector located in the back. The module is designed under the Intellijel 1U format.

Assembled Modules

1U Out Assembled Module

1U021

€86.00

Out is a 1U stereo output module designed to convert audio signals from your modular to line-levels. The module is designed to be used on cases with onboard Jack connectors or Intellijel 7U and Palette series, as it uses the same pinout. The module also includes a high-quality Headphone amplifier with an auxiliar monitoring CUE input.

Friends

Motion MTR - Assembled Module

MT001

€130.00

Motion MTR allows you to mix, attenuate and invert signals while having clear visual feedback of their levels. Each channel can function as: Audio level control with VU meter CV attenuator with voltage meter CV inverter with voltage meter Each input is connected to 10V, so you can use each of them to generate fixed voltages. Also, the outputs of...

Divkid

Divkid Mutes - Assembled Module

DK001

€95.00

Mutes goes above and beyond basic muting by allowing you to split groups of signals to multiple destinations, making it great for FX dub performing and varied signal routing. Vactrols on the circuit gives to the switching a pleasing decay for both audio and modulation as well a totally click free muting. Three-position switch: MOMENTARY signal...

Divkid

Divkid Stereo Strip - Assembled Module

DK002

€185.00

Stereo Strip is a 6HP Eurorack module that builds upon the idea of a studio or mixer channel strip for a modular environment. If you’re new to the term ‘channel strip’ think of a single channel strip from a mixing desk. You’ll find amplification, EQ, panning, and level control options. Stereo Strip builds on those ideas by adding voltage control for...

Assembled Modules

1U STAmp Assembled Module

1U042

€76.00

Assembled Modules

1U STMix Assembled Module

1U022

€92.00

Assembled Modules

1U Out Assembled Module

1U021

€86.00

Friends

Motion MTR - Assembled Module

MT001

€130.00

Divkid

Divkid Mutes - Assembled Module

DK001

€95.00

Divkid

Divkid Stereo Strip - Assembled Module

DK002

€185.00

Assembled Modules

Pony VCO Assembled Module 1U

1U040

€210.00

Assembled version of our Pony VCO module in 1U format. Pony VCO is a fully analog Thru-Zero oscillator with wavefolder and dedicated VCA in only 4HP. The module offers great stability and tuning capabilities thanks to its powerful core, based onSound Semiconductors 2130 IC. It comes with a range selector, that allows it to go down to LFO range, as well as...

Assembled Modules

Pony VCO Assembled Module 3U

BF040

€210.00

Assembled version of our Pony VCO module in 3U format. Pony VCO is a fully analog Thru-Zero oscillator with wavefolder and dedicated VCA in only 4HP. The module offers great stability and tuning capabilities thanks to its powerful core, based onSound Semiconductors 2130 IC. It comes with a range selector, that allows it to go down to LFO range, as well as...

Assembled Modules

ACDC Assembled Module

BF039

€305.00

Assembled version of ACDC Eurorack module. AC/DC is a class-compliant DC coupled audio interface in Eurorack format. With its 6 HP, it is perfect for live performance and travel Rigs.Based on Rebel Technology OWL platform, It allows sending and receiving both CV and Audio at 16 bits 48 kHz. as well as load patches from Rebel’s library.It is compatible...

Assembled Modules

Noise Plethora Assembled Module

BF037

€295.00

Assembled version of Noise Plethora Module. Noise Plethora is a multitimbral noise monster in 14HP.The module consists of three digital sound generators, followed by three analog multimode Filters. This combination makes it easy to sculpt different textures and noises and play with them intuitively and musically.The first two channels let you choose from...

DIY Kits

Full Kits

1U STAmp DIY Kit

1UDIY042

€57.00

Full Kits

1U STMix DIY KIt

1UDIY022

€60.00

Full Kits

1U Out DIY Kit

1UDIY021

€55.00

Divkid

Divkid Stereo Strip - DIY kit

DKY002

€105.00

DIY version of the Divkid Stereo Strip module. Stereo Strip is a 6HP Eurorack module that builds upon the idea of a studio or mixer channel strip for a modular environment. If you’re new to the term ‘channel strip’ think of a single channel strip from a mixing desk. You’ll find amplification, EQ, panning, and level control options. Stereo Strip builds on...

Friends

Motion MTR - DIY Kit

MTK001

€100.00

DIY version of our Motion MTR module Motion MTR allows you to mix, attenuate and invert signals while having clear visual feedback of their levels. Each channel can function as: Audio level control with VU meter CV attenuator with voltage meter CV inverter with voltage meter Each input is connected to 10V, so you can use each of them to generate...

Divkid

Divkid Mutes - DIY Kit

DKY001

€80.00

DIY kit of the Divkid Mutes module. Mutes goes above and beyond basic muting by allowing you to split groups of signals to multiple destinations, making it great for FX dub performing and varied signal routing. Vactrols on the circuit gives to the switching a pleasing decay for both audio and modulation as well a totally click free muting. Three-position...

Full Kits

Pony VCO DIY Kit

DIY040

€150.00

DIY Version of our Pony VCO module. This is a pre-soldered DIY Kit. Pony VCO is a fully analog Thru-Zero oscillator with wavefolder and dedicated VCA in only 4HP. The module offers great stability and tuning capabilities thanks to its powerful core, based onSound Semiconductors IC. It comes with range selector, that allows it to go down to LFO range, as...

Out of stock

Full Kits

ACDC DIY Kit

DIY039

€175.00

DIY version of our ACDC Eurorack module AC/DC is a class-compliant DC coupled audio interface in Eurorack format. With its 6 HP, it is perfect for live performance and travel Rigs.Based on Rebel Technology OWL platform, It allows sending and receiving both CV and Audio at 16 bits 48 kHz. as well as load patches from Rebel’s library.It is compatible with...

View

Full Kits

Noise Plethora DIY Kit

DIY037

€210.00

DIY version of Noise Plethora Module. Noise Plethora is a multitimbral noise monster in 14HP.The module consists of three digital sound generators, followed by three analog multimode Filters. This combination makes it easy to sculpt different textures and noises and play with them intuitively and musically.The first two channels let you choose from...

Full Kits

MEX DIY Kit

DIY038

€52.00

DIY version of our Mex module. MEX, is a gate expander for Muxlicer! It adds a new line of gates to Muxlicer’s sequence, where you can choose to turn off the step, output the same number of gates as muxlicer, or send just one. A very simple concept, that provides great flexibility! And the greatest thing: you can daisy chain them so you can add as many as...

PCB/Panel Sets

PCB & Panels

Out 1U - Pulp Logic Frontpanel

DIY1UPL021

€10.00

These are alternative OUT panels with a Pulp Logic format. Out is a stereo output module designed to convert audio signals from your modular to line-levels. The module is designed to be used on Pulp Logic cases, as it uses the same pinout. The module also includes a high-quality Headphone amplifier with an auxiliar monitoring CUE input.

PCB & Panels

STAmp 1U - Pulp Logic Frontpanel

DIY1UPL042

€10.00

These are alternative STAmp panels with a Pulp Logic format. STAmp is a stereo amplifier designed to boost your external signals into modular levels. The module is designed under the Pulp Logic format and uses the same pinout, making it fully compatible with the Pulp Logic’s cases rear connectors.

PCB & Panels

STMix 1U - Pulp Logic Frontpanel

DIY1UPL022

€10.00

These are alternative STMix panels with a Pulp Logic format. STMix is a four-channel stereo mixer in Pulp Logic 1U format. It can work independently or as an expansion of our Hexmix module via the six-pin connector located in the back. The module is designed under the Pulp Logic 1U format.

PCB & Panels

Pony VCO 1U Mod Kit

DIY1U040

€10.00

Front Panel Kit with the instructions to turn your Pony VCO 3U into a 1U module. Pony VCO is a fully analog Thru-Zero oscillator with wave-folder and dedicated VCA in only 4HP. The module offers great stability and tuning capabilities thanks to its powerful core, based onSound Semiconductors IC. It comes with a range selector, that allows it to go down...

PCB & Panels

Noise Plethora PCB/Panel Set

PCB037

€55.00

PCB/Panel version of Noise Plethora Module. This PCB/Panel set includes the audio codec and the pogo pins. Noise Plethora is a multitimbral noise monster in 14HP.The module consists of three digital sound generators, followed by three analog multimode Filters. This combination makes it easy to sculpt different textures and noises and play with them...

PCB & Panels

MEX PCB/Panel Set

PCB038

€22.00

SMD PCB/Panel set of our Mex module. This is an SMD PCB Set. Please be aware of that! BOM Files and further documentation. MEX, is a gate expander for Muxlicer! It adds a new line of gates to Muxlicer’s sequence, where you can choose to turn off the step, output the same number of gates as muxlicer, or send just one. A very simple concept, that provides...

PCB & Panels

Morphader PCB/Panel Set

PCB036

€42.00

PCB/Panel set of our Morphader module. This is an SMD PCB Set. Please be aware that this is a very dense module and challenging project! BOM Files and further documentation. Morphader is a performative tool designed to make multichannel CV/Audio crossfade easy and comfortable. Fading from one quad CV/audio scene to another. The core of the module has...

PCB & Panels

CV Thing PCB/Panel Set

PCB034

€34.00

CV Thing is a fully mappable CV to MIDI converter in just 6HP. It's based on our VCMC module, but aiming for small and compact performance rigs. It has eight inputs that can be mapped to any MIDI message quite easily thanks to its simple and intuitive user interface. Ccs, Program change,v/oct to Note, or Clock are some of the messages that can be...

PCB & Panels

Lich PCB & Panel Set

PCB035

€40.00

PCB set and aluminum front panel for our LIch module. See module details, documentation, and B.O.M. files here.

PCB & Panels

Percall PCB & Panel Set

PCB033

€45.00

PCB set and aluminium front panel for our Percall module. See module details, documentation and B.O.M. files in here. Percall is a percussive oriented module that will shape four different sound sources into percussive sounds. Percall has four VCAs with dedicated decay envelopes and a mixer, so you can prepare a percussion submix. Added strength input...